FUSE Program at SPC

The FUSE program is saving me time and money. I also get to work and live at home, which is nice. I am very happy that I chose the FUSE program because I like knowing where I’m going next, which is the University of South Florida St. Petersburg.

Plastics to electricity demonstration plant

BGR130 Biogreen demonstration unit in container The concept on which we are working is built on the fact that bulk part of the waste contains a strong energy potential which is expressed in the form of calorific value of the materials This refers to the biomass, wood, plastics and municipal wastes. The idea is that […]

Lutetium – THE MOST EXPENSIVE RARE-EARTH METAL.

Hello everyone today I’m going to talk about such a rare earth metal as Lutetium Lutetium is the last element in the lanthanide series of rare earth metals have become quite familiar with and that is why it has some unique properties. the elements belonging to this series are arranged in a specific order in […]

Using Natural Gas to Generate Electricity

In a thermal power station, like the Queen Elizabeth Power Station in Saskatoon, natural gas is burned in a turbine, which drives a generator to make electricity. The exhaust gas is used in a boiler to convert water to steam. The high-pressure steam is directed into a turbine, which turns a shaft. This shaft is […]

Yttrium – THE BRIGHTEST METAL ON EARTH!

♪ (intro music) ♪ [ATTENTION! This video shows dangerous experiments! Do not repeat the experiments shown in this VIDEO!] Hello everyone. Today I am going to tell you about such a metal as Yttrium. In the periodic table of elements, yttrium belongs to group 3 and is classified as one of the rare Earth metals, […]

Factory to Forecourt – Weld Shop

I’ve messed around with cars all my life, basically since fifteen or sixteen. I like looking at cars, I like to hear the engines. My name is Dwane Hovell, my job description is a welder. I’ve worked at Toyota for nearly three years now. I build rear doors, weld them, braze them, seal doors. There’s […]

Vaporizing Foil Actuator Welding by Collision of Dissimilar Metals

the following is a brief introduction to vaporizing foil actuator welding (VFAW) which is a specialty of the Impulse Manufacturing Laboratory at The Ohio State University VFAW is a type of collision welding which is a technique for joining metals by means of a high-speed, oblique collision. Such a collision removes the surface oxide layers […]

Launchpad || DIY or Buy || Keyboard Matrix & MIDI Tutorial

A while ago, I ordered myself This so-called Launchpad Which, in my opinion, not only features a rather decent build quality, for only 70 euro but also offers a total of 64 square push-buttons And 16 round push-buttons By connecting it to a computer through it’s micro-USB port, the push-buttons can, for one, light up […]

Mod-04 Lec-01 Non-destructive testing

Ocean Structures and Materials, in this lecture will discuss about details on Non-Destructive Testing as applied to ocean structures and marine structures. We closely now look at the outline of module 4 of this course inspection and testing of ocean structures, we will cover introduction to non destructive testing, we will talk about repair and […]

Launchpad || DIY or Buy || Keyboard Matrix & MIDI Tutorial

A while ago, I ordered myself This so-called Launchpad Which, in my opinion, not only features a rather decent build quality, for only 70 euro but also offers a total of 64 square push-buttons And 16 round push-buttons By connecting it to a computer through it’s micro-USB port, the push-buttons can, for one, light up […]