How to Properly Move & Feed the Rod | Welding

Two of the most common mistakes beginners find is either moving your welding rod too quickly across the seam, or too slowly. I’ll demonstrate both. [pause] Here you can see two good welds flanking a weld that was done too quickly. A good weld, and good speed is indicated by a good spacing between these […]

Common Beginner Mistakes | Welding

I’m going to try to demonstrate some of the most common problems or mistakes that beginning arc welders encounter. One is which the arc will not start, or the arc rod sticks. Neither is cause for panic, and is usually the result of one or two things. Either your voltage is set too low or […]

How to Pick a Welding Rod | Welding

Selecting the right welding rod is critical to the success of your welding job. You see here before me four different kinds of welding rods. They vary in three important ways. One is diameter from 5/32 to 1/8 to 3/32 to numerical number 6013 in this case, 6011 here, and 7014 here. This last set […]

How to Select Rods for Arc Welding- Technical Secrets urdu hindi

salam o alikum my name is kashif raza and you are watching technical secrets. i hope that all friends will be fine there. as you know that today’s video topic is arc welding electrodes. stick welding or shielded metal arc welding skill that take much practice to master and selecting the correct electrode for the […]

How to Select Rods for Arc Welding – Kevin Caron

(Text on screen): How to Select Rods for Arc Welding, Kevin Caron, www.kevincaron.com The Voice: Hey, Kevin. What are you looking at? Kevin Caron: These are welding rods for an arc welder, and I had a question the other day from a new welder. He’s just teaching himself how to work; how to weld, like […]