A Versatile Welder/Generator in the Champion 145

– Spark your imagination with the Champion 145 Welder/Generator. Portable at 220 pounds with running gear and roll bar frame built for added protection. Briggs & Stratton Intek engine with 6.25 gallon fuel tank for longer run times. 4,500 watt surge power and 4,000 watts continuous power to run additional tools. Can handle DC stick […]

LED Shop Lights – JIMBOS GARAGE

Welcome to Jimbo’s Garage welcome back to Jimbos Garage well you know lightings always a problem everybody shop especially when you’re doing some filming or not even filming just doing some general work now my shop is about 900 square feet and I felt that I’ve got pretty good lighting in here I’ve got (4) […]

Aluminum Boat Mast Build | JIMBO’S GARAGE

welcome to Jimbo’s garage welcome back to Jimbo’s garage well I’ve got another good one for you here this week we’re gonna be building an aluminum mast crane for for the back of a houseboat it might be similar to a dabit crane or add a bit lift the idea is going to be same […]

Start Welding Quickly With the Champion ELITE

– Spark your imagination with the Champion Elite welder generator. Easy to setup and start welding, no tools oil change, and digital hour meter. Just over three feet long and weighs less than competitive units. 11,000 watt surge power and 9,500 watt continuous power to run additional tools. 225 amp welder creates smooth arc starts […]

Do It Yourself: MIG Welding Sunflower Yard Art

– Hi, I’m Joel Ort with Hobart Welding Products. Today, we have a simple project for you to make. It’s some yard art. We’re gonna be making a sunflower, and for this project, we only need two pieces of material. I have a two foot by three foot piece of sixteen gauge sheet stock, and […]

How to Create a Custom Metal Sign With a Plasma Cutter

My name’s Barbie The Welder, and I’m a full-time metal sculptor. Today I’m going to share with you how to easily make some metal art using a plasma cutter. This project is super cool because there are no limits to what you can make. All you gotta do is use your imagination and follow the […]

DIY TIG Welding Project: Planter and Flower Vase

Hey, I’m Josh from Brown Dog Welding and today we’re going to make a vase slash planter depending on how you want to use it. We have some stainless steel here. I’m going to be using mild steel and copper as well. We’re going to use stainless steel filler, we’re going to use mild steel […]

HTP INVERARC 200 TLP REVIEW | JIMBO’S GARAGE

welcome Jimbo’s garage good evening everyone welcome back to Jimbo’s garage well today we’re gonna be taking a look at the HTP inverarc 200p LP but before we get started I just want to say this is not a paid endorsement from HTP I did call them I let them know that I’d be interested […]

Fire Pit Welding Project

Hey, it’s Steve from Arc Academy. We have a fun little project for you today. If you’re like me, I’m from Michigan. Michigan people know that all seasons really need a fire pit, so what we’re gonna be doing is we’re gonna be making a very simple 4 panel fire pit for you today using […]

Fixing My Mill – JIMBOS GARAGE

Welcome back to Jimbo’s Garage welcome back to jimbos garage well the time had finally come think I want to drag this old mill out and get it operational now this was my bottom loss meal when he moved it was about five years ago we just toss it in the corner over here and […]