DIY Toyota Supra Pt 3 – Welding

Hi, welcome to my-supra.de nice that you have switched to the second episode Today it comes to welding work on the front right body i wanted to show you very briefly with what i am welding the welder is loan from a good friend because I have not yet purchased a welder but I will […]

COMO SOLDAR FERRO FUNDIDO – DIY

Turbo noises Hi guys, welcome to Baguete’s Garage Today we will repair a cast iron exhaust manifold that cracked Let´s start by removing the manifold from the engine Now we will remove the catalytic converter and the oxygen sensor The catalytic converter is in good shape and the gasket too Let’s clean the area where […]

How to Install Stainless Steel Locking Ties without Special Tools

[music] For our Thermal-Ties you don’t need any goofy tools You can use needle nose and some diagonal pliers. You can also use some angled needle nose pliers, those seem to be a little helpful for us and our installation procedure works with pretty much any manufactures ties We are going to start by pre-installing […]

Projet 22b – Épisode 5 | Coupure + Soudure traverse avant (Notch+Weld subframe)

Hi guys, we continue to work on the Subaru today! It’s hot outside, I love it so yesterday I started reassembling the engine, it’s right here It’s ready to go in but I still have to repair the rust in the engine bay So the plan is Engine’s on the lift so I can get […]

Stary Film: Prymitywne Metody Blacharskie HOW TO RECYCLE SCRAP METAL FOR YOUR WELDING PROJECTS

In the countryside, it’s hard to find resources.. So when doing a project such as a Żuk We having a lot of difficulties getting parts. I must admit, it’s really impossible at times. Even our internet is carried by bucket from our landlord! So in my garage, I’ll show you how we restore metalwork in […]

Nitrous Backfire Intake Manifold Repair – FAIL

Its December and amazingly its still warm outside it wont last long though Im sure start burning some wood and wearing some coats There are alot of thing about being a fabricator or just someone who can fix something one of the perks is stuff people deem as trash they will give you for free […]

DO YOU REALLY NEED A GRID HEATER??

well I’m sure as everybody already knows our Cummins doesn’t have any glow plugs just a good heater so you can see here this is the first gen good heater it’s pretty restrictive right well this is the exact same grit heater unit they use it all the way up until like 2007.5 so in […]

Welding A Custom Fuel Filler And Battery Tray | Turbo Mustang

I think today is going to be a hang out with me day you okay with that nothing in particular going to be working on except for the goose going to try to get some stuff down this thing going to try to finish the filler next to the fuel tank may work on some […]

350Z Make Over

In this episode of Mighty Car Mods, we get working on our 350Z.Welcome to another episode of Mighty Car Mods where we are working on our 350Z which is inspired by some of the stuff you can do in “Need for Speed Payback.” That’s right, we’re back on the Nissan train everybody… Choo-choo! Also known […]