Influence of grinding direction – Tungsten Electrodes

The influence of the grinding grooves on the arc behaviour. If the grinding grooves are located around the tip of the tungsten electrode, radially, there can be no stable arc behaviour. First we look at the behaviour of the electrons. In the case of radial grinding grooves, the electrons exit the material in a diffuse […]

Стол с эффектом бесконечности .

SUBSCRIBE TO THE CHANNEL THE BEST COMMENT WILL RECEIVE A GIFT THIS TABLE

Learning How to Weld with Arc Academy – The Arc

The Elements of Welding: The Arc So your first element of welding is your arc. Well, what is your arc? Your arc is essentially like a static electricity or a lightning bolt. It’s plasma. What is plasma? Well plasma is the completion of a circuit through gas, that’s what it is it’s the fourth ionizing […]

Como soldar raiz (Control de Onda) Tuberia

s_d_p_ is surface tension transfer a lincoln electric innovation it is in advanced waveform mig welding process which offers exceptional open ruth has twelve ng esti tvtropolis numerous the images sbc to learn trading time significantly reduced compared to stick s_t_d_’s capable of producing code quality wells for projects were one hundred percent inspection is […]

Tig welding. Various Fillet Welding Methods. (stainless steel sheet welding)

Various Fillet Welding Methods Hello. Today, I made a video about the different fillet welds. I’d appreciate it if you could press “subscribe” and “Like.” This is stainless steel. Today we’re going to do a lot of fillet welding on this. First of all, the size of this steel plate is 30mm And it is […]

Influence of the tip angle – Tungsten electrodes

The influence of the tip angle on the puddle, the heat penetration and the arc stability. It is often thought that a pointed tip creates a smaller puddle, But in reality, with a tip of 30 degrees, you’ll have a larger puddle than with a tip of 60 degrees. The reason for this is that […]

Common Problems When TIG Welding Aluminum

T4E – Setup procedure for Dynasty 350 (GTAW)

Alright. Today, we’re going to be looking at setting up our Dynasty 350 for Gas Tungsten Arc Welding of carbon or stainless steel. First thing we’re going to do is hook up our leads. We have our workpiece connection which goes with this symbol here. Make sure that’s snug. We have our electrode lead which […]