Should You Use Pulsed TIG Welding for Aluminum?

Are you ever challenged with making long runs on your aluminum production pieces? Or maybe you just want a little bit faster weld with welding aluminum. You can try adding the pulser to it to help you add the filler metal to your weld puddle. And if you increase the pulses per second on your […]

G.G. Schmitt Reduces Rework by 10% With Dynasty Welders

We reduced our scrap rework with the 400, in the 6 to 8% range and it keeps going up every month. And we’re starting to see, 10 to 11% less scrappage of the BDA from the arc out. And it’s helping on time, it’s increasing efficiencies. And it’s also increasing productivity at the same time. […]

TIG Welding Aluminum Part 1: How to Hold the Torch

Hi, I’m Andy Weyenberg with Miller® Electric. I handle the motorsports marketing for Miller and we get a lot of questions for TIG welding, precisely aluminum. Even from beginners to experienced welders who do a lot of welding with steel, a lot of people have some problems that are working with aluminum. So we’re going […]

Welding Aluminum Exhaust On The Twin Turbo Mustang

all right so let me take a second to explain to you exactly what I’m about to do so there’s already a stainless pipe that comes off the turbo and goes basically down into the inner fender got v-band clamps on both ends originally the aluminum was kind of went from there and tried to […]

TIG Welding Aluminum: AC Balance Control

Read and follow all labels and the owner’s manual carefully before installing or operating your machine. Hi, I’m Brent Williams with Miller® Electric and we’re going to discuss the benefits of using AC balance control for welding aluminum, so you can set and adjust this useful feature for optimum results. Let’s take a closer look […]

Welding Aluminum With the Dynasty 280 DX Multiprocess Welder

To set up the Dynasty 280 DX Multiprocess to weld aluminum using an ArcReach 12 SuitCase feeder, there are a few considerations to get optimal performance with this solution. Use 3/64 inch Hobart MaxalMig 4943 or 5356 wire and a 300 amp Bernard gun. Install the appropriate U-groove drive rolls and contact tip. For better […]

Skeleton Tig Welding Torch Holder

whats going on?…its like 9:30 at night everybody is in bed, and im just chillin in the shop I flet like making something so… I have had this little tig torch holder at my welding table it works but I wanted to make something cool

TIG Welding Aluminum Part 2: Hand Movement Tips

What I try to tell my beginner people is get comfortable, okay, keep the distance consistent and without even striking arc, work on your flow of your hand in the torch movement. We try to do this with your gloves on just like you would be in a normal welding situation. If you don’t move […]

New Multimatic 220 AC/DC: It Does, so You Can Too

You need the Multimatic 220 AC/DC. Does it MIG weld? It does. The Multimatic 220 AC/DC welds MIG and flux-cored, steel and aluminum with a spool gun. Up to 230 amps of power, handles material up to 3/8-inch thick, and you’ll get great arc quality. Does it stick weld? It does. It welds stick with […]