TIG welding stainless pipe- 5G Fill Pass and Cap Pass (Walking The Cup)

5G Filling and Final Welding Hello. We’re gonna do pipe welding again today. We’ve filmed the fillings and final welds in 5G position. I’d appreciate it if you could press “subscribe” and “Like.” This is a pipe that was back-bead welded at the previous time. If you have any questions about back-bead welding, we would […]

Tig welding stainless pipe. 5G root pass. 65A (2 1/2 inch) SCH10

5G Back-Bead Welding Hello. Today, we made a video about the stainless steel pipe “5G Root Pass.” I’d appreciate it if you could press “subscribe” and “Like.” So today we’re going to do a 5G position weld. Welding will be done from 6 o’clock to 12 o’ Pipe size is 65A (2 1/2 inch) SCH10 […]

[GTAW]티그키홀용접/TIG WELDING/티그용접/Tig kyehole welding

Hello This video is a keyhole welding method video. There are several ways to keyholes, but one way. When I make this weaving, when the keyhole is made, I will put the fillets on both sides. Electricity was 130 amps, Ceramic 8 tungsten used 3.2mm, and 2.4mm was used. Personally, I think this method is […]

GTAW/tig welding freehand/티그용접/알곤용접/S80 6″파이프용접/필드용접/ 1인칭시점/현장용접시 주의사항및체크사항

Hello today is 6 “SCH80 field welding method. It is not such a difficult point. If a weak wind blows into the pipe, the flow of air is amplified. Be sure to check that the pipe end is not blocked by the wind before welding. Also, make sure your windshield is well installed on the […]

Tig Welding Stainless Pipe – Keyhole Welding and Tight Bead

Keyhole welding and tight bead Hello. Today, we made a video about keyhole welding and a dense bead. I’d appreciate it if you could press “subscribe” and “Like.” This is a 100A (4 inch) SCH10 Stainless 304 pipe. Pipe thickness is 3.05mm. I’m going to do this welding today. Today we did “Tack-weld” using stainless […]

Tig welding Walking The Cup 5G pipe welding Hot Pass Fill Pass Cap Pass carbon steel pipe

Hello. Today, I will do pipe welding with 5G position. Fill in the gaps in the grooves and cover the final welds. I’d appreciate it if you could press “subscribe” and “like.” Now this is a back-bead welded pipe from the previous time. If you’re curious about the back-bead video, please refer to the previous […]

Tig welding stainless steel pipe -2Pass weld and low back-bead (65A SCH10)

2Pass welds and low back-beads Hello. Today we’ll be welding stainless steel pipes again. As I mentioned in the previous video, I’ve captured the 2Pass welds and the low back-beads. I’d appreciate it if you could press “Subscribe” and “Like.” This is a 65A (2 1/2 inch) SCH10 stainless steel pipe. In the previous time, […]

Tig Welding Walking The Cup on Carbon Steel 1G Butt Welding (hot pass, capping)티그용접 맞대기 #tigwelding

Hello. Today, I made a final-weaving video, with a groove in the butt weld I’d appreciate it if you press “subscribe” “like” before you see it. I’m the one who worked on the back-bead in the previous video. If you are curious about the back-bead video, please refer to the previous video. Today we’re putting […]

TIG welding (comparison of tungsten angle and welding)

Comparison of tungsten angles and welding Hello. Today… I made a video about “Comparison of Tungsten angle and Welding.” I’d appreciate it if you could press “subscribe” and “like.” Some people are curious about how to polish tungsten, so I made a video. If you’re looking for a book on welding or any material on […]

Tig Welding Basic #2 Tigwelding without filler 알곤용접배우기 #2 제살용접

Guten Tag. TIG Schweiß BASIC #2 Ich habe ein Video über “TIG WELDING WITHOUT FILLER” erstellt. Wir würden uns freuen, wenn Sie “SUBSCRIBE” “LIKE” drücken würden. Das ist Edelstahl. Die Dicke beträgt 3 mm. Ich werde damit zuerst schweißen. TIG WELDING WITHOUT FILLER ist eine der großen Stärken des Tigs. Sie können ohne Schweißstäbe schweißen. […]