FUSE Program at SPC

The FUSE program is saving me time and money. I also get to work and live at home, which is nice. I am very happy that I chose the FUSE program because I like knowing where I’m going next, which is the University of South Florida St. Petersburg.

3M™ Hot Melt ST Connector Polishing – Training

The polishing technique is the same with all the 3M brand ST, SC, and FC Hot Melt Connectors. To begin, start with an air polish. You may use any coarse grit such as 9 micron lapping film. Air polishing is done by holding the connector in one hand with the ferrule end face up and […]

FUSE Program: Prospective Students

Hey everyone I’m Alexis and today I want to tell you about an exciting opportunity incoming SPC students can take advantage of called Fuse. The Fuse program guarantees your admission to University of South Florida system institution with an associate’s degree from St. Petersburg College. Save time and money by starting at SPC and transferring […]

3M™ Hot Melt ST Connector Cable Prep – Training

Slide the strain relief boot, small end first, on to the cable. If you are using non-jacketed 900 or 250 micron fiber, you will need to slide the clear strain relief tube onto the buffered fiber following the boot. To strip the fiber to the proper lengths, lay the cable on the strip template and […]