Joining Square Tubing at 90 Degrees, Preparation for Welding, the 3 ways I Fabricate the corner.

today I’m going to show you the three welding joints that I use for joining square tubing at a 90 degree angle and number one obviously is just a straight butt joint nothing too smart in that just join it straight up now you do get stuck with an open end whether it’s running up […]

The 3 ways I Fabricate 90 degree Corner joints for Welding Square Tubing

today I’m going to show you the three welding joints that I use for joining square tubing at a 90 degree angle and number one obviously is just a straight butt joint nothing too smart in that just join it straight up now you do get stuck with an open end whether it’s running up […]

How to weld steel tubes using semi auto welding technique with a piece of wood

Don’t stop the video I will do also the other side Here is the other side as you can see the sides are cleaned very well to make a good contact the wood looks like this after one attempt The weld starts at about 130 Amps Then it has to be reduced at about 80 […]