Making a Rail Anvil Stand

The rail gets traced here to establish a template The outline is cut using a bandsaw The template fits over the rail in both directions Strips of 1/2″ plywood are cut on the table saw Plywood squares are cut The template is used to trace the outline onto each square Holes are drilled to help […]

How to Use the Jeweller’s Micro-Flame Butane Torch

Go to Beadaholique.com for all of your beading supplies needs! Hi. This is Julie with Beadaholique.com. Today we’re going to do a product demo of the Mirco-Flame Torch. This is great for using in various jewelry projects including resin making when you want to get the bubbles out, soldering, jewelry casting wax working, metal sculpting […]

Forging and Testing a Mild Steel Armor Plate – Overpowered!

What you see here is a one and a half inch square bar of mild steel getting ready for a pounding at Friis Forge. Check out the channel if you’re interested in blacksmithing, its linked in the description below. Mild steel is readily available nowadays and it’s of better quality than what was available historically […]