HOW TO FIT AN OUTSIDE TAP – Plumbing Tips

– Plumberparts.co.uk, honest reviews and advice. Hello and welcome to today plumberparts.co.uk video. That is a customer’s cat, it’s tiny, a little kitten, I don’t know, it was a baby. This video is gonna be all about how to fit an outside tap. There’s a couple of ways you can do it. Two types of […]

Making long reach C clamps

In the woodworking shop you can never have enough clamps. But sometimes, no matter how many clamps you have. You don’t have the right kind of clamp. So I made some specialty clamps. These are long-reach C clamps that can reach places that most clamps can’t reach. And in this video I’ll go through and […]

How to Make The Metal Melter

In a previous video I used a modified Microwave Oven Transformer as an electrical metal melter. In this video you’ll learn step by step how it was made, and what I’m using it for now. In a previous project, I found an old microwave in a dumpster and hacked it open to see what components […]

DIY CNC Router on Certiflat Welding Table Part 1: Introduction

All right, so what I’m gonna do with this is I’m going to be building the CNC table out of this and this is one of their 3×4, but what I’m going to do is I’m going to extend out here another foot and so I have four four foot by four foot capabilities and […]

Make a Spot Welder for Cheap!!

A typical resistance spot welder like this can range in price from around $200 to over $800! That’s a little out of my price range, so for this project let’s make this one from common materials, and for just a few bucks! This modified transformer is the heart of the Spot Welder, and you might […]