Fix Ball Joint(MOOG) to Lower Control Arm – Nissan press-fit Screw Type. Part 10/10

in this video we’re going to take a time out to replace the lower ball joint for the left side double wishbone independent suspension so we are finished with replacing the stabilizer link and the stabilizer bar support mouth so this will not cause any issue with the suspension before with the broken stabilizer link […]

How to Replace: BMW E39 Wheel Carrier Ball Joint (Rear Sway Bar End Link, Integral Link) FCP Euro

hey everybody it’s scared with FCP today I’m going to take you through the steps and how to replace the rear ball joint on an e39 also good replacing the rear end upper link as well as the rear sway bar link so let’s get started first thing to do is remove the through bolt […]

Stunt Bike Build Series | Episode 9 | Stainless Steel Braided Brake Lines – Barboflex

Hey guys! Let’s start the video in a different way. Not the same way as the others. Hi guys! Everything good? CBRTricolor here to another video! Wait! Already did it!…. Maybe in the next video, I will change the welcome message I’m in a different place today As you can see here behind me We […]

Why Roller Coaster Track is Filled with Sand

For the past century, theme parks all over the world have been battling one another to construct taller, faster, and more exhilarating thrill machines in order to outshine the competition and attract the largest crowds. Driving this battle forward are the engineers and roller coaster designers who have developed innovative ways to build these towering […]

PART 1 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

I wanted to make this video Of doing rust repair on a squarebody C10 pickup trucks This is my 77 Chevy 1/2 ton C10 And I’m doing rust repair here in the cab Doing the floor pans Also doing the kick panels Inner and outer rockers as well This first video I just want to […]

PART 2 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

Ok, here’s another video I’m posting about my Rust panel, patch panel work Rust repair work I’m doing On my 77 half ton C10 And I wanted to show you guys I made a mistake here And I wanted to document this So others don’t make this same mistake Basically what I did was I […]