Metal Shaping with Lazze: Rolling a Bead with a Wire Edge

Hi I’m Lazze and I’m teaching people in metal shaping. And I’m here back again now on YouTube with tips and tricks. And on this little video I going to show you how to make this wire edge where we put the wire in and the bead. And this was a question that I had […]

MTD YardMan Lawnmower Restoration with Stainless Steel Body Honda Engine

Please Subscribe to my Channel

1940s Metal Lathe [Restoration]

There is no room on the other side of the pin to punch it out These will need to be fixed Surprise! This is locked in…for now This needs replacing, so I can be aggressive. The set screw made a large burr Check to see how worn the bushing are These need new bushings I’ll […]

How To Apply Body Filler – Mixing, Spreading, Sanding & Tips – Part 2 of 3 – Kevin Tetz at Eastwood

if I get on it too soon it’s going to load my paper I don’t necessarily want that but I want to find that magic window – I can I can really go to town and I can get this level and shape quickly and efficiently now it is going to continue to shrink somewhat […]

Eastwood Outlet Store, Pottstown Pennsylvania

The Eastwood Outlet Store in Pottstown, Pennsylvania is your source for automotive savings, whether you’re restoring a classic car or maintaining your daily driver they’ll have what you need to do the job right they also offer a variety of welders and accessories for all your fabrication needs check out their exclusive in-store sales including […]

DIY POR 15 – How To Prep Rust Before Applying POR15

(upbeat music) – Hey, this is Donnie Smith and we’re on the Mustang project. And you can see that we’ve got some of this coated. We got the floor pan coated, we used the POR 15. In this video, I’m going to show you the steps that we took to get it prepped and ready […]

Day #23 – 71 VW Beetle – DIY $50 Paint Job w/t a Roller! classic restoration giveaway

alright guys so I didn’t feel much but we busted it we get the whole thing kind of primered out get the bond of stuff patched we’re ready to paint the top half in the bottom half I think on the actual body of the car so tonight bondo front fenders get ready to sand […]

Cut-N-Weld Welding and Plasma Cutting Work Stand by Eastwood

it’s pretty sad that I have to start a video off like this but there are like three people out there that just try to really for everybody else this tool was given me by Eastwood and if you’re not capable of making your own decisions on whether you need these tools or not regardless […]

Ep3 Cheap High SCFM Air with Parallel Compressors

OK, Hi Kids! Welcome back to Hannah’s Bug! To remove the paint and rust from my bug, I’m going to use a lot of sandblasting. Now, sand blasting requires a lot of air volume, not so much air pressure. Air pressure is measured in PSI while air volume is measured in SCFM, or Sustained Cubic […]

How To Remove Paint & Rust with Stripping & Cleaning Discs – Kevin Tetz & Eastwood

so while the bedliner coating is drying on the bottom of said sled we’re going to take on another project stripping the paint off the panels that haven’t been stripped or blasted yet now in the nineties all three of the big three automakers had a huge problem with the Lambs delamination paint coming off […]