Not working hot and cold water dispenser viva 8liech-sc-ssd cold water problem solved, how to fix

HOW TO FIX WATER DISPENSER ! MAKE SURE YOUR DISPENSER IS UNPLUGGED FROM THE POWER SOURCE ! 8LIECH-SC-SSD Use #2 phillips head screwdriver to remove cover. remove 2 screws to remove circuit board from white clips, push clip together with 2 fingers and slide each corners carefully of the pin make sure that circuit board […]

3 Ways to Remove Ball Joint Rivets!

Power Windows/Mirrors/Locks Not Working? – Replace Main Accessory Power Fuse 02-06 GMC Envoy

How To Replace Upper Ball Joint – Dodge Durango (’00-’03) & Dodge Dakota (’00-’04)

Hey this is another video by Pet Rock and today I’m working on my ’03 Dodge Durango 4×4. And today I’m going to be replacing the upper ball joints. As you can see from this angle the dust boot has actually torn on the back end and it is gushing out the grease that should […]

Airless Q&A #1 – How to Change the Fuse on a Graco GX 21 Airless Paint Sprayer

First we remove the intake tube holder. This gives us room to remove the cover assembly. There are two screws on either side That must be removed to remove the housing Now carefully slide off the housing The fuse sits on the green circuit board in plain sight Make sure the sprayer is turned off […]