Sheet Metal Brake Fabricating Tight Bends for a Truck Bed at Eastwood

a really difficult thing to do when metal working or in a restoration project is recreate tight boggles these type joggle bends like on this old truck can’t be recreated by most metal breaks let me show you how with the new Eastwood metal break we fabricated a panel that matches these contours perfectly yeah […]

PART 1 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

I wanted to make this video Of doing rust repair on a squarebody C10 pickup trucks This is my 77 Chevy 1/2 ton C10 And I’m doing rust repair here in the cab Doing the floor pans Also doing the kick panels Inner and outer rockers as well This first video I just want to […]

PART 2 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

Ok, here’s another video I’m posting about my Rust panel, patch panel work Rust repair work I’m doing On my 77 half ton C10 And I wanted to show you guys I made a mistake here And I wanted to document this So others don’t make this same mistake Basically what I did was I […]

Rust Repair Panel DIY – Patch Panel & Installation Kit for your Car from Eastwood

all right today what we’re going to do is sew sew a patch panel here get this mg fender here with a guy wants to repair and you can see it’s a lot of legwork and from the back side we saw a lot of holes back here so we gotta cut this out a […]

CUTTING AND DRILLING SPOT WELDS | How To Use a Spot Weld Cutter

Well really the first thing you need to do Is to actually identify where your spot welds are And I’m kind of lucky here I’ve got one that’s kind of showing up You can see the little divot Right there at the tip of my finger And really the best way to find them Is […]