Completing a Resin Repair on an Insulated Rail Joint

prior to work an inspection should be carried out to determine the condition of the IRJ carefully inspect the rain for deformation such as end batter and cracks TEF 3205 should be completed during this inspection which should determine the best treatment for the site and highlight any work required prior to refurbishment depending on […]

2016 Flow Fuse GT Binding Overview by SnowboardsDotCom

Hi there, welcome to the Morning Shred, brought to you by snowboards.com. I’m Jenna, this is Tim from Flow and we’re going to talk about the Flow Fuse GT binding. Tim, tell us a little bit about this binding. Yeah, the Fuse GT is the top of the line in our composite bindings, meaning that […]

2016 Flow Fuse Binding Overview by SnowboardsDotCom

Hey there, welcome to the Morning Shred, brought to you by snowboards.com. I’m Jenna, this is Tim from Flow and we’re going to talk about the Flow Fuse binding. Tim, tell us a little bit about this binding. Yeah, the Fuse is a binding we came out with about I guess, last season and it’s […]

Stainless Steel Cable Deck Railing

Take your deck or indoor balcony to the next level with this showcase item. Quigley Cable Rail has donated stainless steel cable railing valued at forty five hundred dollars. With its sleek lines and minimal profile, stainless steel cable rail allows you to enjoy the surrounding landscapes virtually unobstructed. It has a sleek elegant design […]

Controlling Trains – Network Rail engineering education (3 of 15)

[train passing] ♪ pizzicato background music ♪ (Narrator) Britain’s rail network transports 3 million passengers and 400,000 tonnes of freight a day. With hundreds of trains using it at any one time. All this traffic presents us with a safety challenge. Trains are guided by rails, so it’s impossible for them to swerve or pull […]

2018 PHMSA Hazardous Materials Safety Research and Development Forum — Day 1

RICK: AGAIN, I INTRODUCE MYSELF. I AM RICK BOYLE. WHAT WE ARE LOOKING FOR TODAY IS COME MY ASSOCIATE ADMINISTRATOR BILL SPOONER SAID, I WANT YOU TO EMPHASIZE, WE WANT THE FEEDBACK FROM THE AUDIENCE. WE’RE NOT DICTATING TO YOU AND TELLING YOU THIS IS WHAT WE ARE DOING AND WE HOPE YOU ENJOY IT. […]

An Introduction to Switches & Crossings – Network Rail engineering education (12 of 15)

[train passing] ♪ background music ♪ (Narrator) Switches and crossings play an essential role in connecting the rail network. We use them to guide trains from one track to another and to enable lines to cross paths. Put simply, they’re the junctions that allow us to create a multi-lined, multi-routed rail network. At Network Rail […]

Making a Rail Anvil Stand

The rail gets traced here to establish a template The outline is cut using a bandsaw The template fits over the rail in both directions Strips of 1/2″ plywood are cut on the table saw Plywood squares are cut The template is used to trace the outline onto each square Holes are drilled to help […]

Loram – Laborer

♪ It’s gonna be a life changer, it was for me. If I could look back and know that Loram was here, I’d probably have came to work for Loram sooner. As long as you come to work and you work hard, you’ll go places. I like to start my laborers out on maintenance. You’re […]

DIY CNC Router on Certiflat Welding Table Part 9: Update Running Linux

hey YouTube so it’s been about a year and a half since I did it in videos on the third flat CNC machine and frankly I haven’t done anything with it since then it’s been kind of a workbench and catch-all for storm throwing stuff on top of table I ran into a project the […]