How To Metal Fabrication with the Eastwood Shrinker Stretcher

and show you one of the must-have tools whether it’s a go to work or just general sheet metal fabrication it’s our shrinker stretcher what we’re gonna do is we’re gonna make a patch panel for this piece right here one we can’t buy a replacement quarters for risk-free normally find any other so going […]

Soldering a Guitar Cable

hey how you doing I’m Mike today we’re going to talk about soldering if you like to make music with anything that has a cable attached to it like a guitar or a mic or an audio interface basically anything that’s got a hole to stick a cable in you’re going to want to know […]

Car Rust Repair -How to Fix Rust Pits in a Fender with Glazing Putty & Rust Encapsulator at Eastwood

hi my name is mike i’m a tech here at Eastwood and we’re right in the middle of working on project resolution and the spot here on the fender needs a little more attention so today I’m going to show you how to mix spread and sand some of our contour glazing putty and the […]

Dent Repair How To DIY with MIG Stud Weld Kit from Eastwood

what we got here is our early Mustang you can see we put a quarter panel on it now we came up here to the door area grounded down to it looked ok once we got all the filler off because these two sharp creases we don’t have money for a new skin so we’re […]

Rust Repair Panel DIY – Patch Panel & Installation Kit for your Car from Eastwood

all right today what we’re going to do is sew sew a patch panel here get this mg fender here with a guy wants to repair and you can see it’s a lot of legwork and from the back side we saw a lot of holes back here so we gotta cut this out a […]

How to MIG Weld, Repair a Door or Fender and Save Money from Eastwood

as mark on today’s rd corner we’re going to teach you how to make well show your real world application by preparedness door skin here we’re going to do is show you the performance and value of these units and how they can pay for themselves in the first job let’s get started all right […]

Welding – How to MIG Weld, Troubleshoot & Repair a Door or Fender – Eastwood

as mark on today’s rd corner we’re going to teach you how to make well show your real-world application by preparedness door skin here we’re going to show you the performance of value of these units and how they can pay for themselves in the first job let’s get started all right before getting to […]