How To Metal Fabrication with the Eastwood Shrinker Stretcher

and show you one of the must-have tools whether it’s a go to work or just general sheet metal fabrication it’s our shrinker stretcher what we’re gonna do is we’re gonna make a patch panel for this piece right here one we can’t buy a replacement quarters for risk-free normally find any other so going […]

PART 1 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

I wanted to make this video Of doing rust repair on a squarebody C10 pickup trucks This is my 77 Chevy 1/2 ton C10 And I’m doing rust repair here in the cab Doing the floor pans Also doing the kick panels Inner and outer rockers as well This first video I just want to […]

PART 2 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

Ok, here’s another video I’m posting about my Rust panel, patch panel work Rust repair work I’m doing On my 77 half ton C10 And I wanted to show you guys I made a mistake here And I wanted to document this So others don’t make this same mistake Basically what I did was I […]

How to use a heat gun for PVC tarpaulin welding?

Πώς χρησιμοποιείται το πιστόλι θερμού αέρα για συγκόλληση μουσαμά PVC; Προσαρμόστε ένα πλακέ ακροφύσιο πάνω σε ένα ακροφύσιο μείωσης Βεβαιωθείτε ότι οι γωνίες του μπαλώματος είναι στρογγυλεμένες για βέλτιστο αποτέλεσμα Προσαρμόστε το μπάλωμα μουσαμά PVC πάνω στο επεξεργαζόμενο κομμάτι Συνδέστε το καλώδιο τροφοδοσίας σε μια πηγή ρεύματος Ενεργοποιήστε το πιστόλι θερμού αέρα και ρυθμίστε τη […]

Rust Repair Panel DIY – Patch Panel & Installation Kit for your Car from Eastwood

all right today what we’re going to do is sew sew a patch panel here get this mg fender here with a guy wants to repair and you can see it’s a lot of legwork and from the back side we saw a lot of holes back here so we gotta cut this out a […]

HH-66 Vinyl Cement – Using Underwater

This video is brought to you by Sailrite. In this video we will demonstrate using HH-66 Vinyl Cement underwater. We’re going to use some clear vinyl from Sailrite this is a 20 gauge Plastipane, but other vinyl products could be used also as long as they do not have a protective coating applied to the […]

How to Weld a Steel Patch Using a Copper Backer – Kevin Caron

(Text on screen): How to Weld a Steel Patch Using a Copper Backer, Kevin Caron, www.kevincaron.com The Voice: Hey, Kevin. What are you doing? Kevin Caron: Well, have you ever had a hole you had to fill in on a piece of metal? The Voice: Yeah? Kevin Caron: I’ll show you a little trick here. […]

How to MIG Weld, Repair a Door or Fender and Save Money from Eastwood

as mark on today’s rd corner we’re going to teach you how to make well show your real world application by preparedness door skin here we’re going to do is show you the performance and value of these units and how they can pay for themselves in the first job let’s get started all right […]