Tormach Making Chips- University of Illinois Baja SAE U-Joint

Hi, my name is Dylan. I’m a Machine Design Engineer here at Tormach, and today I was cutting a U-joint as a personal project. Tink A few weeks ago a couple of my buddies reached out to me at the University of Illinois to machine some parts for them and the University of Illinois Baja […]

Jeep Wrangler Synergy Dana 30/44 HD Ball Joint Set (2007-2017 JK) Review

I’m Ryan from and this is my review of the Synergy Ball Joint Set for all of you with either the Dana 30 or the Dana 44 axle in your 2007 and up JK. Today we are going to talk through the installation of this ball joint set, which I am going to give […]

Tacoma C4Fab Low-Profile Metal Off-Road Winch Bumper Installation

So, I got this 2018 Toyota Tacoma a few months ago and I’ve been doing projects on it ever since. And I’ve added a lift to it – a three-inch Icon suspension, and I’ve added this roof rack. And I’ve added a grille to the front of the truck. Today we’re going to do something […]

How to Install Stainless Steel Locking Ties without Special Tools

[music] For our Thermal-Ties you don’t need any goofy tools You can use needle nose and some diagonal pliers. You can also use some angled needle nose pliers, those seem to be a little helpful for us and our installation procedure works with pretty much any manufactures ties We are going to start by pre-installing […]


The story is, that the “VELNYSMEDIA” came to Vilnius. And we’ve decided to take the Subaru and get it out on the road. So here’s how it happened. It’s best not to leave vehicle parts lying around in the nature. There’s no way it’s gonna fit into the trunk. Speed and power… Just don’t run […]

Making Custom Brackets for a 50 inch LED Light Bar Truck Mount

Today we are going to be mounting a 50 inch light bar on my truck. Let me explain what I have done so far. That piece of duct tape right there is marking the center of the windshield. As you can see on the light bar itself I have put a piece of duct tape […]

The Top 5 Things You Need in Your Overland Vehicle | Outside

(funky music) – My name is Todd Rogers. I’m a partner with Four Points Adventures based in California. We’re gonna show you just some basic pieces and parts that are very helpful and handy to have. And if you’re just starting out in the over landing industry. If you’re a gear head you can go […]

The Dangerzone: Episode 7 – Martha Tansy

okay welcome to the dangerzone podcast we are going on the road Oklahoma City to the airport I have Martha tansy with me and we’re going to try and do this interview on the road this is a danger zone podcast first so welcome and let’s get started and of course we have traffic as […]

Totaled Tacoma Manual Swap + Welding the Diff

[Music] [Music] we’re here in beautiful British Columbia Canada getting transmission parts for the Tacoma I know you guys are gonna be stoked on that our good friend Clinton here just hooked it up one of our subscribers fellow youtuber himself their garage dirt garage and we’re checking out his truck right now cuz he […]

RESQ1 Field & Service Jeep – SEMA – Eastwood

yeah everybody it’s matt from the school company where I see me 2013 that will admit a lot of years we kind of heavy on the street rod muscle car stuff but we also love off-road vehicles and we’re with Kristen from JP magazine jeeps are one of the fastest growing trends in the automotive […]