1994-2004 Mustang OPR Front Lower Control Arm and Ball Joint Assembly Review

OPR’s driver side front lower control arm we’re taking a quick look at today is gonna be a good option for any Mustang owner out there that might be in need of a new control arm after years of abuse. Now these aren’t going to be geared towards any type of performance benefit, as they […]

2015-2017 Mustang Billet Fuse Box Cover Review & Install (GT, EcoBoost, V6)

Hey guys, Adam here with americanmuscle.com. Today I’m bringing you a quick overview and installation of the Billet fuse box cover fitting all 2015 and newer GT, V6, and EcoBoost Mustangs. So, in this overview, I’ll be going over the styling and appearance of the Billet fuse box cover as well as its materials and […]

1994-2004 Mustang OPR Replacement Front Lower Ball Joint Review

So OPR’s front lower ball joint end that we’re taking a look at today is going to be a good quality, factory-style replacement for the Mustang owner out there that’s on a budget, and that need to replace a worn out or a broken joint. So some typical signs of a bad ball joint can […]

Metal Shaping On The Mustang Hot Rod

alright guys welcome back to the fab forums yet another episode on the Bibbster so in the last couple of videos I’ve been working on getting the framing of that rear rear section of the Bibbster kind of the idea done but today it’s time to lay some sheet metal on it so gonna take […]

Mercedes AMG – Masina care merge singura

I do not even a proper face for this car, you know? We started with this huge vessel. Tit, tit The car drives itself… All right, let’s see if the car will break Look, I got my legs up Lets hope we dont make an accident now.. See, look how it puts the brake, the […]

How to Install Stainless Steel Locking Ties without Special Tools

[music] For our Thermal-Ties you don’t need any goofy tools You can use needle nose and some diagonal pliers. You can also use some angled needle nose pliers, those seem to be a little helpful for us and our installation procedure works with pretty much any manufactures ties We are going to start by pre-installing […]

2015-2017 F-150 Carrichs Stainless Steel X-Fender Flares – Polished Review & Install

Hey, what’s going on guys? Adam here with americanmuscle.com. Today, I’m bringing you a detailed overview of Carrichs X-Fender Flares in stainless steel fitting all 2015 and newer F-150s. In this video, I’ll be touching on the functionality and styling of the X-Fender Flares as well as the quality and materials. Now, later on, I’ll […]

1979-2004 Mustang V6, V8, Cobra Pypes 2.5″ Stainless Steel Replacement Flow Tube Kit Review

The Pypes 2.5-inch stainless steel replacement flow tube kit fits ’79 to ’04 V8 and V6 Mustangs, and ’94 to ’99 Cobras. You’re gonna wanna check out a kit like this if you’re upgrading your exhaust in stages by buying a mid-pipe and then buying a set of mufflers, in whatever order, instead of picking […]

2005-2014 Mustang GT, V6 Russell Stainless Steel Braided Brake Line Kit Review

Hey guys, Stephanie with americanmuscle.com, here with the review of the Russell Stainless Steel Braided Brake Line Kit for 2005 to 2014 GT and V6 Mustangs with AVS. There’re a handful of reasons to upgrade your brake lines. Yours could be broken or damaged, you could have a spongy feeling pedal that you wanna get […]

Mustang Exhaust Tail Pipes: 5.0Resto 2.5″ Stainless Steel (86-97 Fox Body & SN95)