Why the Multimatic 255 is Ideal for Chassis Welding

My name is Ben Hughes. I’m a chassis fabricator here at the Roadster Shop. One of the biggest advantages of this machine I see, is the reduced heat input. It’s giving me less spatter, and the pulsing effect really reduces burn-through. So, I don’t have to be too cold to make it all the way […]

Stick Welding With Multimatic 255

Now, let’s set up the Multimatic 255 for welding the stick process. Please take a few minutes to review important safety information and tips, and remember to wear appropriate safety gear during setup and welding. First, while the machine is off, make sure the drive lead is disconnected. Then, insert the stick stinger into the […]

Welding Aluminum With the Dynasty 280 DX Multiprocess Welder

To set up the Dynasty 280 DX Multiprocess to weld aluminum using an ArcReach 12 SuitCase feeder, there are a few considerations to get optimal performance with this solution. Use 3/64 inch Hobart MaxalMig 4943 or 5356 wire and a 300 amp Bernard gun. Install the appropriate U-groove drive rolls and contact tip. For better […]

Flux-Cored Welding With Millermatic 255 or Multimatic 255

Now, let’s set up your Millermatic, or Multimatic 255 for the self-shielded flux-cored process. Please take a few minutes to review important safety information and tips, and remember to wear appropriate safety gear during setup and welding. First, make sure your machine is powered off. Open the side door. Wrap the control cable through the […]

Dynasty 280 DX Multiprocess Setup: Flux-Cored Arc Welding

This is how to set up the Dynasty 280 DX Multiprocess for welding steel using an ArcReach 12 SuitCase feeder, 1/16 inch Hobart XLR-8 wire, and a Bernard Dura-Flux gun. First, install the appropriate drive rolls and contact tip. With all connections complete, select the V-Sense mode on the front of the Dynasty. When using […]

Millermatic 255 and Multimatic 255: Think Simply. Weld Smarter.

Think Simply. Weld Smarter. With the Millermatic 255 and Multimatic 255. Both machines have a simple user interface that saves time, and Auto-Set Elite, which lets any welder easily choose the right parameters. The Millermatic 255 saves space in the shop. Pulsed MIG reduces spatter and cleanup. Optional EZ-select gun changes programs with a button […]

New Multimatic 220 AC/DC: It Does, so You Can Too

You need the Multimatic 220 AC/DC. Does it MIG weld? It does. The Multimatic 220 AC/DC welds MIG and flux-cored, steel and aluminum with a spool gun. Up to 230 amps of power, handles material up to 3/8-inch thick, and you’ll get great arc quality. Does it stick weld? It does. It welds stick with […]