G.G. Schmitt Completes Welds Faster With Dynasty Welders

When you start off with a new product it’s the learning curve. Miller came in and did training, and the interface became very, very user friendly. Once they’re hired, they get the job, everything, I put them in the Dynasty, and that, like, you can see the smile on their face how it makes their […]

Multimatic 255 Multiprocess Welder Setup

Congratulations on your purchase of the versatile, easy-to-use Multimatic 255 multiprocess welder, and thanks for choosing Miller. With your Multimatic 255, you can count on years of trouble-free, multipurpose, multiprocess welding. We know you’re eager to try out your new machine. But before you begin setup, please take a few minutes to review important safety […]

Flux-Cored Welding With the Multimatic 220 AC/DC

Please take a few minutes to review important safety information and tips for the Multimatic 220 AC/DC. And remember to wear appropriate safety gear during setup and welding. The standard MIG gun provided with your Multimatic 220 AC/DC is designed to run flux cord wire. But Miller suggests using the optional gasless flux cord nozzle […]

Miller TIG Welders Deliver Best Arc for Manufacturer

Having the flexibility that the Dynasty offers us to be able to really tweak that arc. The pulse feature, being able to change the frequency is very important to us. We can get a more focused arc to receive better penetration on the fillet welds. Our performance is awesome, you can dial it in, you […]

How Plasma Cutting Works: Part 1

Plasma arc cutting is a process that uses an electric arc and high-velocity gas or air to cut metal. When gas or air is highly heated, it ionizes, becoming electrically charged plasma capable of conducting electrical current.

Increase Productivity With the NEW Multimatic 255

Think Simply. Weld Smarter. With the Multimatic 255. Solving problems that reduce productivity, like difficult-to-use machines that cause downtime. The Multimatic 255 has a simple user interface that’s easy for welders of all skill levels, reducing setup and changeover time by 40 percent. With other machines, trial and error is the only way to find […]

Marine Manufacturer Cuts Hours of Rework on Aluminum Welds

G.G. Schmitt was established in 1951 out of Lancaster, Pennsylvania. We have this location that we’re at here today in Sarasota, and we also just started a new facility up in Summerville, South Carolina. Our primary market is the marine industry throughout the United States. We service all the OEM boat builders, the customers that […]

Wolfpack Motorsports Uses Miller to Build Polaris RZR

Jeremy Merrell, we are here at Wolfpack Motorsports in Orange County, California. These vehicles are going anywhere from you know, 60 to 100 miles an hour. And at that speed there’s some bad things that could happen if you don’t have reliable equipment. Right behind me we have our Polaris RZR racecar that we race […]

RMD Welding Technology Doubles Productivity for Sigma Thermal

Anything that makes the welder’s job easier is a good investment, to me. Even with no profit, if it makes the guys’ job easier, you’ve made a better workplace, you’ve made a better environment. One of the things I love about the PipeWorx, it does a great job of MIG welding pipe. It also does […]

Remove Complexity With EZ-Set Technology

Setting parameters on welding equipment is a challenge today, because we have welders of different skill levels and a lot of advanced features that makes it a lot harder to set equipment up. EZ-Set on the new Deltweld helps with that, because if you don’t know where to set your wire feed speed or your […]