Walking the Cup VS Freehand Roots: Horizontal (2G)

– Hope you’re having a marvelous Monday. Been doing a series of pipe welding videos using four-inch Schedule 40. I gotta get with the cub on cuttin’ these coupons out of these pipe. Coo-pins! It a little crooked. We’ll work with it, we’ll work with it. We’re gonna run a horizontal route today, the 2G […]

šŸ”„Welded Xmas Present Jail Cell

– Hey, welcome to Weld.com. It’s Christmas time. Going to get Mancub. Mancub likes his Crown Royal. I don’t think he’s old enough to drink it, sure don’t act like it sometimes. Anyway, I’m going to mess with him a little bit. It’s been done before but I’m going to make a little jailhouse for […]

How to Use AC TIG OFFSET to get Better Aluminum Welds

– Welcome to Weld.com, I’m Bob Moffatt and I have Mr. Jason Becker with me today from Valencia College. Welcome, sir. – Thank you Bob, for having me. – We’re going to argue, cuss, and discuss about a feature that ESAB has on their 205 called AC TIG Offset. What do we know about it? […]

Origami Weld Cart BUILD!! Part 1

– So on a previous episode you guys have seen Jeff Ray here do an awesome TIG demonstration for us on some exhaust systems for Heffner Performance. But when Jeff left the facility we would send him back for the Everlast PowerTIG 200DV. So Mancub and I got to talk and how cool it would […]

4F Dual Shield Overhead FCAW – Do’s and Don’ts

– Welcome to Weld.com. I’m Bob Moffat. I got the Cub here today, say hi Cub. – How you guys doing? – What is all, yeah we’ll talk about that later. – Hey you see, I started this first. (laughs) – Did you really? I started this like a week ago. Anyway, hey we got […]

5G TIG Root Pass: 2 Inch Sch 80 Pipe

– Welcome to another episode of “Weld.com.” We’re gonna start a series on pipe-welding in all positions. We’re gonna start out with 2-inch schedule 80, today is 5G. My fit-up, or my prep, is to clean the inside of the pipe. We have removed a little mill scale out here, dressed up the bevel, and […]

Four Ways to Remove MILL SCALE

– I have Mr. John Thompson, National Technical Sales Director for Pferd, and I have some technical questions for you. – Fair enough. – I want to get into this piece of plate here and I want to clean it, but I don’t want to do what, you know, normally I would get into this […]

6G TIG Fill and Cap: 2 Inch Heavy Wall Pipe

– We’ve been doin’ a series of pipe welding videos on two inch, Schedule 80. This one is 6g. We did the root pass video and now we’re going to do the fill and the cap. I’m runnin’ off an EVERLAST 161 STH, live arc feature. Runnin’ a 17 series torch, number five cup, may […]

Rapidarc Rapid X Welding

– Ready? – Wanna do the intro? – Huh? – Wanna do the intro? Do it man, do it. – Alright. Welcome back YouTube, it’s Jason Becker with weld.com here with Bob Moffett. Today, we’re gonna talk a little bit about RapidArc and RapidX, the differences between the two and the advantages of both. So, […]

7018 2G Fill Cap: 2 Inch Sch 80 Pipe

(laughs) – What? – What’s so funny? I haven’t even got to the punchline yet. We got the Cub in here today. What’s up, man? – How you doing, bud? – I’m doing good, I’m doing good, hanging. I threw a little TIG root in here, you going to do a, you going to finish […]