Tools – DIY Insane Metal Folder

in my last video formed the edges of the panel using hammer forming but as I’ll be doing quite a few panels I wanted to come up with something easier so after some YouTube research I decided I’ll try and make a metal folder one that can fold a 1 meter wide sheet of metal […]

Metal Shaping: Jaguar E-Type Aluminum Bonnet Build (Part 9B)

Hi, it’s Wray Schelin for pro shaper in Charlton Mass and tonight we’re working on 9b of the all-aluminum e type nose And this is where we left it off and it’s pretty obvious to me that this is never gonna fit How could this possibly? Become that it’s impossible. But let’s give it a […]

Metal Shaping: Jaguar E-Type Aluminum Bonnet Build (Part 9A)

Hi, it’s Wray from Pro Shaper in Charlton Massachusetts and This is part 9 of building the all aluminum e-type nose, and this is the pot. We’re going to be working on tonight We had a little hiatus against it’s been a couple of weeks since we got back to this and here we are […]

Basic English Wheel Technique, Lazze Metal Shaping

Hi I’m Lazze and I’m teaching people in metal shaping and you have met me before on YouTube and on my website probably. On this video I going to show you for free what, what we have on the DVD that we sell. This will give you a very important preview of how to use […]

Lazze Metal Shaping: Tricks Using Magnets to Make Working Easier

So when we building a car body we using something that is very unique, actually and we using very strong magnets. And because when we make the left side and then we make the right side of the cowl, and then we make the door but then we going to put the pieces together; how […]

Lazze Metal Shaping: Keeping Flat Materials Flat in the Bead Roller PART 2

Hi I’m Lazze and I’m back here with this floor pan and it’s going to be part two for this video. And you see how this panel came out for on the first video we made and it’s curved this way and many times it’s get really oilcan and it’s really hard that weld it […]

Lazze Metal Shaping: Stainless Steel Panel in the Bead Roller

Hi I’m Lazze and this is going to be the next trick in the bead roller with a skateboard wheel. And we find out new things all the time to do in with the skateboard wheel and this is amazing. And you going to love this. Look at this side or half of motorcycle tank. […]

Bomber Seat – made EASY!

One of my most popular YouTube videos is Beading Machine Basics. It’s had over 2.6 million views so far, with no end in sight. The grand finale of this video shows a fancy Bomber Seat made from aluminum. There’s a link to this video in the comments section if you’d like to see it. A […]

Metal Shaping with Lazze: Rolling a Bead with a Wire Edge

Hi I’m Lazze and I’m teaching people in metal shaping. And I’m here back again now on YouTube with tips and tricks. And on this little video I going to show you how to make this wire edge where we put the wire in and the bead. And this was a question that I had […]

Making Motorcycle Gas Tanks – Part 2

These are selected scenes from the 166 minute long ‘Making Motorcycle Gas Tanks’ DVD. Check out all the Covell DVDs at covell.biz ! That’s kind of a rough sketch, but I think that’s more or less the shape I want to have for this tank. And we’ll put a soot coating on this piece of […]