Ковка забрала для рыцарского арме. Как сделать шлем.

Hello everyone! I continue to make the visor for the armet “Griffon”, And now you can see that the chin is partly finished. The lower visor. Nope, can’t see anything. Looking good. It goes well. Maybe some of you, who are experienced in the armor crafting, are wondering: what are these two things here? This […]

Stand 21 Lid Lifter Head sock principle explained by Martin Christensen

What we have here is another brilliant Stand 21 product: The head sock with the helmet remover built into it This way it allows you to safely and fast remove the helmet whithout putting any pressure on the neck in case you have an injured driver It’s super simple: it goes into the helmet You […]

Краш-тест шлема. Фальшион, шестопер, полекс, алебарда против бацинета!

Hello everyone! This is Igor Parfentev from BuhurtTech and Slava Perepelitsa from legendary ArmorySmith! And today we will be testing the “Heavy Griffon” bascinet. The edge of the plate is a bit cracked. Overall, if the helmet can withstand such hits, and the fighter is not injured, is a very good result. This is a […]

Titan Vaper Auto Darkening Welding Helmet

Hello, I’m Jorge with KMS Tools. Here I’m holding the Titan Vaper helmet. This helmet has an auto-darkening feature. It goes from Shade 9 to Shade 13. Sensitivity knobs are on the outside, as well as your shade knob (from 9 to 13). It has a feature that most people tend to like, which is […]

Using Your Miller Supplied Air Respirator (SAR)

Warning: Read and follow all labels and the Owner’s Manual. You work hard, so does your Miller respiratory protection. Learn how to keep it that way for years to come. Hi, I’m Brian and I’m here to tell you about the proper care and use of your Miller Supplied Air Respirator or SAR as I’ll […]

How To Install a Suspension Into a Bullard Hard Hat

Today, you’ll learn how to install a suspension into a Bullard Hard Hat. First, orient the suspension assembly so that the brow pad faces the front of the helmet. This means that the suspension adjustment will face the rear of the helmet. You will adjust the suspension at the rear of your helmet, once it […]

NASCAR Driver Helmets | 26 Years of Cat® Racing

These three right here are the driver’s helmets that I collected over the years. This one right here, down here, is probably one of the best ones. It’s got an excellent story behind it. This is Ward Burton’s helmet from 2002 when he was driving for Bill Davis Racing. This helmet was actually used in […]

Vlog #5 – ABS & HDPE UV Resistance (Safety Helmet/Hard hat)

Hello Matthew Judson Technical Director at JSP Ltd One of those common questions we get asked about helmets is How resistant are ABS and HDPE to UV um thats one of the things that comes up commonly all of the matierials thatJSP are using and indeed other manufacturers are using out there is UV stabalised […]

Review Of Electronic Welding Helmet From Harbor Freight ~ by Old Sneelock’s Workshop

Guts & Bourbon – music Hi I’m Old Sneelock Welcome to another episode of Old Sneelock’s Workshop I’m going to have to get one of those electronic helmets. Cause this one Though it works fine For Stick Welding Is not allowing me to hold my head in the proper position To do a good job […]

Auto Darkening Welding Helmet From UniMig (RWX8000)

this is the rwx8000 it’s an automatic welding helmet from unimig this helmet got four sensors for automatic switching from light to dark and back again keeping your hands-free for focusing on your welding you can adjust between shades 5 through 13 as well as the sensitivity and the delay and you can save the […]