How To Make Slow Burning Fuses

When experimenting with homemade pyrotechnics, things go wrong, and you don’t want to be too close if your composition explodes. I need some sort of a pyrotechnic time-delay, so for this project I’m using items from around the house, to make a simple form of a slow burning fuse. If you’ve seen my videos on […]

How To Make Slow Burning Fuses / Homemade Rocket Fuel (R Candy) / How To Make Safety Fuse

hello guys and welcome to our channel Crazy Daddies we’re on in 21st floor our new office there many good things about this office but two of them was just bring first of all this is balking right here we can make all kinds of experiments out here second thing is is that you look […]

The Electric Deck of Cards

This looks like a deck of cards, it feels like a deck of cards, and it even handles like a deck of cards. But this little gadget has a very shocking secret. In this project, you’ll see how Stuart Edge, was able to give these lucky ladies, an electrifying first kiss. For this project, we’re […]

#EP-70 Home Made Welding Machine Pt 2

Not 8 Its 18Cm Height Of Core 18.5 CM Width Of Core

Diy Mini Gas Torch | How_to_make Mini Light Welding Machine

So Guys Lets Start The Video, Thanks For Watching The Video, Thanks For Watching The Video.

Burning Stuff With 2000ºF Solar Power!!

In a previous project I found a free tv and turned it into a giant solar scorcher. This shoots out a deadly beam of sunlight, that’s hot enough to abuse food, melt metal and burn things you probably shouldn’t. Today seemed like a good day to play with my Solar Scorcher. I positioned my frame […]

The Metal Melter

I’ve just modified this Microwave Oven Transformer into a dangerous little device. 800 amps of electrical current is about to be bad news for anything made of metal. Today I’m in the mood to melt some metal. This Microwave Oven Transformer used to be a dangerously high-voltage device, but I modified it so the voltage […]

How to make a DIY metal detector / Easy Tutorial

https://www.instagram.com/romanursu/ https://www.instagram.com/romanursu/ https://www.instagram.com/romanursu/

How to make a mini Hydrogen Generator / TUTORIAL

您需要準備這些東西 2個同尺寸的冰棒棍 在棍面上畫上鑽孔點 再叧一根棍面上重做一次 再穩穩的將兩根冰棍壓緊 鑽孔 鑽孔後就像這樣 每相隔一個孔鎖上一個螺絲並穿過兩冰棍 再換面重做一次 再螺面上焊上錫點(可視螺絲材質選用合適的錫) 換面重做一次 然後 再螺面錫點上焊上電線 現在 可以將導電模組放入玻璃瓶中 瓶蓋上要鑽一個合適孔徑的洞 拿出西藥房買的滴管組 切掉上端 將電線穿過瓶蓋開孔 再將滴管組的觀察室塞進孔中,盡量塞緊 再用熱融膠封口,確保氣體不外洩 鎖緊瓶蓋 再依據實際需求剪截滴管 在集氣瓶鑽2個合適大小的孔 將滴管末端由孔1塞入瓶中 一定要將管子穿到瓶底 再將裁剩的那截滴管由孔2穿入瓶內.不必穿太深 再以熱融膠封口 這時 可以倒入清水了 蓋上瓶蓋 取一些鹽加水攪均 再打開瓶1 (導電模組) 倒入剛才自製的鹽水(導電液) 要淹滿整個導電模組 鎖緊瓶蓋 現在可以將電線接上電源供應器了 調整輸出電壓為 2.1 伏特 現在 您會看到瓶內開始有汽泡產生 (泡泡測試)

How To Make Bat Blades

I just got back from the hardware store where I picked up some replacement blades for my utility knife. Because overtime, these things get dull and pretty rusty. But, as I took the old blade out and took a good look at it, I had a revelation on what kind of project we could do […]