Milwaukee Grinder Repair – Replacing the O-Ring (Milwaukee Part # 34-40-0560)

This O-ring is used to seal your grinder spindle assembly to the gear case housing. The O-ring fits tightly around the spindle housing and seals against the gear case. The O-ring keeps the gear case lubricant from leaking from the housing. Over time, the O-ring can fail and break. This will cause oil to leak […]

How to cut steampipe/black pipe for a turbo merge collector with simple tools

2.5mm (3/32″) thick cutting disc: Cuts straight Cuts slow 1.0mm (3/64″) thick cutting disc tends to drift when cutting off square cuts fast Determining offset to cut pipes to fit rectangular turbine entry (T3 flange shown here)

Harbor Freight Belt and Disk Sander Unbox and How to Modify

hey folks I’m Dennis thanks for watching my video today I’m going to unbox and set up a central machinery 4 x 36 belt sander with a six inch disc sander. my wife picked this up for me on sale with a coupon from Harbor Freight I’ve got a really sweet deal on it couldn’t […]

How to custom paint Ground metal with disk grinder and candy painting

How to paint GROUND METAL with Disk grinder Sanding – #80 Sanding – #120 Sanding – #180 disk grinder Never use a grindstone ! [ Main point ] Using a Scotch Bright disc Transparent primer Genuine black Candy tangerine Clear coating

How to MIG Weld a Grinder Stand

– Hi, I’m Joel Ort with Hobart Welding Products. Today we have a project for you that is more of a need than a project. What I mean by that is I’m going to be building a grinder stand. And the reason for that is I’ve always had my grinder sitting on my workbench, so […]

Altering a belt grinder table

okay here’s a project I’m trying to in my mind I’m trying to figure out how to do this this is my grinding jig and what I do is I pull tonight to this jig and this bolt here adjusts the angle of the jig so when I put a knife on it if I […]

How to Use a Handheld Grinder : How to Grind Welds with a Handheld Grinder

On behalf of Expert Village, I’m Terry. And today I’m going to show you how to use a hand held grinder. On this piece of metal, I have a weld here. If this was not cosmetic and I wasn’t going to see it I wouldn’t worry about it. But let’s just say this was on […]

Handmade Metal Bender – Metal Bending Tool

Handmade Metal Bender This is my loop bender that I use for bending loops for spurs loops for spurs for the hangers it can be called a staple or a brad I call it a loop 3/6″ diameter material that is cut 3″ in length I have this metal bender that I handmade you can […]

Remove Rust, Paint, Seam Sealer, Undercoating & More! Pneumatic Rotary Removal Tool – Eastwood

well thanks for tuning in for another live at the eastwood garage today we’re going to go over the pneumatic rotor removal tool so this tool is going to be great for moving everything from undercoating seems healer pinstriping and even rough and all those new areas that are hard to get to with a […]