Survivor Stories, Episode 3: Combine harvester accident

My accident took place on the 20th of August ’97. That particular year we had an early harvest here in Donegal I decided to pull the machine in and get the brakes sorted out before we went to steep ground The brake system on these machines are tucked underneath here are tucked underneath here on […]

How To Make Slow Burning Fuses

When experimenting with homemade pyrotechnics, things go wrong, and you don’t want to be too close if your composition explodes. I need some sort of a pyrotechnic time-delay, so for this project I’m using items from around the house, to make a simple form of a slow burning fuse. If you’ve seen my videos on […]

How To Make Slow Burning Fuses / Homemade Rocket Fuel (R Candy) / How To Make Safety Fuse

hello guys and welcome to our channel Crazy Daddies we’re on in 21st floor our new office there many good things about this office but two of them was just bring first of all this is balking right here we can make all kinds of experiments out here second thing is is that you look […]

The Electric Deck of Cards

This looks like a deck of cards, it feels like a deck of cards, and it even handles like a deck of cards. But this little gadget has a very shocking secret. In this project, you’ll see how Stuart Edge, was able to give these lucky ladies, an electrifying first kiss. For this project, we’re […]

#EP-70 Home Made Welding Machine Pt 2

Not 8 Its 18Cm Height Of Core 18.5 CM Width Of Core

T4E – Voltage and Current

Hello! My name is George Crump. I’m the Electrical Technology instructor here at the Kansas City Kansas Community College in the Technical Education Center. Today I’m gonna be talking about how to determine the voltage at your home on the service panel and also give you some safety tips. In addition, I’m going to show […]

When Molten Salt Hits Molten Metal

>>In the past, we’ve had a few videos where we melted down copper, some where we melted aluminum, and some where we melted salt. And today, we’re gonna see what happens if we try combining some of these things. [Captions by Judy V. at Y Translator] [Music] [Music] Hey guys. I am Nate. Welcome back […]

T4E – Setup procedure for Dynasty 350 (GTAW)

Alright. Today, we’re going to be looking at setting up our Dynasty 350 for Gas Tungsten Arc Welding of carbon or stainless steel. First thing we’re going to do is hook up our leads. We have our workpiece connection which goes with this symbol here. Make sure that’s snug. We have our electrode lead which […]

T4E – Setup of XMT 350 MPa with SS 22D Wire Feeder (GMAW)

Today, we’re going to look at setting up our XMT 350 with our SS 22D Wire Feeder. The first thing we’re going to look at is, we’re going to get our filler metal. And make sure you have the right size. You want to check your AWS classification and your filler metal diameter, which is […]