DIY Metal Foundry Project Tutorial – Melting aluminum in homemade furnace – ep31p2- Roma Custom Bike

In this episode we’ll test the metal foundry we built in the previous episode Hi folks, I’m Custom Cez for Roma Custom bike and I welcome you to part two of the metal foundry project. In the previous episode, if you have missed it check the links in the description, we have built our new […]

Melting Scrap Copper – Pouring Copper

since I have all this copper and I might as well start melting some bars… figured I would go ahead and do that today! We got lots of copper here so I guess I’ll start by throwing a nice little chunk in the bottom and I think since there’s so much copper here I’m gonna […]

Melting COPPER in an Oil Burner – by VOG (VegOilGuy)

Hi YouTube, my name’s Geoff and I’m the VegOilGuy. You may have seen my Home Made Veg Oil Burner Video or even my Home Made High Temperature Foundry Vid. Well a question I keep being asked is how hot can my Oil Burner go… and I really don’t know. So I set out on a […]

Melting Aluminum Cans Into Bars At Home (kinda)

Hey everybody its Rob with Rob finds treasure and I’ve got like 25 aluminum cans that I’ve been saving… figure today I would just try to do a little a little bit of pour I’ve never worked with aluminum so I’m a little bit concerned about making sure I’m safe so I’ll be wearing a […]

Melting SALT in a Furnace

Hey guys, I’m Nate welcome back to the dome where today! We’re gonna be doing some experiments using salt and seeing what happens if we melt it down in our foundry some other channels have already Done some experiments using molten salt, and I figured it was our turn to give it a shot so […]

Melting Copper and Aluminum into Bars and Rounds – Devil Forge

I didn’t cover it in my last video but I wanna make sure everyone knows that I do preheat my molds and my tongs… just wanna make sure I pointed that on this video since I didn’t point it out in my last one once again we’ll let the borax do its thing to help […]

Direct Melt Tilting Waste Oil Foundry 1

Building my air control box Using Wax paper to keep the glue (on the tabs) from sticking to the table Slots for the sliding control board Gluing it all up 100% flow setting. Top arrow shows airflow direction. Setting for 0 to 50% flow. Slide board to adjust Chunk filter in my waste oil fuel […]

Will Glass Bottles Melt?

Whoa! Hey what’s up guys? Welcome back, I’m Grant Thompson – The King of Random And I’m Derek, I run a channel called Veritasium. Today we’re here to answer a comment request from pandapika Who wants to know does the backyard metal foundry get hot enough to melt glass That’s we’re here to find out […]

Melting Metal to Make Clamps [with Casting Tips]

Hi Friend! In this video we’re going to be melting some aluminium and casting some circular clamps, a bit like these, to clamp onto a big old pipe, like this one here. [claps] Lets do it! [intro music] I’ve got this from a very old project, and it always feels a bit funny breaking up […]