AC TIG, MIG and Stick Weld With One Powerful Machine

This is a Multimatic 220 AC/DC. This machine is capable of MIG, Stick, and AC/DC TIG. A lot of our customers use the Multimatic 215 and the Multimatic 200 for steel and stainless. This machine gives them the added benefit of AC TIG for aluminum. This all-in-one solution allows you to weld with 230 amps […]

NEW Millermatic 255 Helps Reduce Downtime

Think Simply. Weld Smarter. With the Millermatic 255. Solving problems that reduce productivity, like difficult-to-use machines that cause downtime. The Millermatic 255 has a simple user interface, that’s easy for welders of all skill levels. It cuts setup and changeover time by 40 percent. With other machines, trial and error is the only way to […]

Adjust AC Frequency and Balance for Aluminum TIG Welding

The Multimatic 220 is super easy to set up and use. It’s got Auto-Set technology that allows you to set it up automatically with your tungsten size and also, all you do is just choose your material thickness and the machine will set the parameters for you. They give you a range to use, but […]

Flux-Cored Welding With the Multimatic 220 AC/DC

Please take a few minutes to review important safety information and tips for the Multimatic 220 AC/DC. And remember to wear appropriate safety gear during setup and welding. The standard MIG gun provided with your Multimatic 220 AC/DC is designed to run flux cord wire. But Miller suggests using the optional gasless flux cord nozzle […]

Flux-Cored Welding Basics: What is Flux-Cored Welding?

The flux core arc welding process and self-shielding wires can be used when welding outside, or where other environmental conditions prevent the use of an external shielding gas. In this process, the outer covering and flux core melt in the heat of the arc, producing shielding gas and creating a slag covering that protects the […]

Getting Started With Your Millermatic 255 MIG Welder

Congratulations on your purchase of the versatile, easy to use, Millermatic 255 MIG welder. And thanks for choosing Miller. With your Millermatic 255 you can count on years of trouble free welding. We know you’re eager to try out your new machine, but before you begin setup, please take a few minutes to review important […]

Flux-Cored Welding Tips and Techniques

In certain situations such as welding outdoors, you may find that conditions prevent you from using an external shielding gas. When this occurs it may be necessary to use the flux core arc welding process with self-shielding wires. There are two main types of flux core wire. Flux core wires that do not require external […]

Flux-Cored Welding Basics: Tips for Flux-Cored Welding

Hi, my name is Joel Ort with Miller Electric Manufacturing Company. Today we’re going to show you how to weld with the self-shielded flux core welding process and the flat horizontal vertical and overhead positions. Unlike the MIG process, flux core welding does not need a shielding gas. The reason for this is that the […]

Flux-Cored Welding With Millermatic 255 or Multimatic 255

Now, let’s set up your Millermatic, or Multimatic 255 for the self-shielded flux-cored process. Please take a few minutes to review important safety information and tips, and remember to wear appropriate safety gear during setup and welding. First, make sure your machine is powered off. Open the side door. Wrap the control cable through the […]

Miller ArcReach Technology Improves Jobsite Welding Safety

I’m Joe Ryan with Miller, and I’m here to talk about some new technologies focused on the construction industry. ArcReach® is a technology that allows for parameter and process adjustments at the weld joint. Improving productivity, weld quality, and safety on job sites. ArcReach technology is available on an XMT® 350 and supports stick and […]