Flux-Cored Welding With the Multimatic 220 AC/DC

Please take a few minutes to review important safety information and tips for the Multimatic 220 AC/DC. And remember to wear appropriate safety gear during setup and welding. The standard MIG gun provided with your Multimatic 220 AC/DC is designed to run flux cord wire. But Miller suggests using the optional gasless flux cord nozzle […]

Flux-Cored Welding Basics: What is Flux-Cored Welding?

The flux core arc welding process and self-shielding wires can be used when welding outside, or where other environmental conditions prevent the use of an external shielding gas. In this process, the outer covering and flux core melt in the heat of the arc, producing shielding gas and creating a slag covering that protects the […]

Flux-Cored Welding Tips and Techniques

In certain situations such as welding outdoors, you may find that conditions prevent you from using an external shielding gas. When this occurs it may be necessary to use the flux core arc welding process with self-shielding wires. There are two main types of flux core wire. Flux core wires that do not require external […]

Flux-Cored Welding Basics: Tips for Flux-Cored Welding

Hi, my name is Joel Ort with Miller Electric Manufacturing Company. Today we’re going to show you how to weld with the self-shielded flux core welding process and the flat horizontal vertical and overhead positions. Unlike the MIG process, flux core welding does not need a shielding gas. The reason for this is that the […]

Flux-Cored Welding With Millermatic 255 or Multimatic 255

Now, let’s set up your Millermatic, or Multimatic 255 for the self-shielded flux-cored process. Please take a few minutes to review important safety information and tips, and remember to wear appropriate safety gear during setup and welding. First, make sure your machine is powered off. Open the side door. Wrap the control cable through the […]

Miller ArcReach Technology Improves Jobsite Welding Safety

I’m Joe Ryan with Miller, and I’m here to talk about some new technologies focused on the construction industry. ArcReach® is a technology that allows for parameter and process adjustments at the weld joint. Improving productivity, weld quality, and safety on job sites. ArcReach technology is available on an XMT® 350 and supports stick and […]