How to cut steampipe/black pipe for a turbo merge collector with simple tools

2.5mm (3/32″) thick cutting disc: Cuts straight Cuts slow 1.0mm (3/64″) thick cutting disc tends to drift when cutting off square cuts fast Determining offset to cut pipes to fit rectangular turbine entry (T3 flange shown here)

Jewelers and Precious Stone and Metal Workers

Whether it’s creating a diamond wedding ring or making a one-of-a-kind necklace, jewelers create wearable art. Jewelers and precious stone and metal workers design and make jewelry, and often sell it as well. They also repair older jewelry, and may appraise the value of both gems and jewelry. Precious metal workers use hand tools to […]

Making a Rail Anvil Stand

The rail gets traced here to establish a template The outline is cut using a bandsaw The template fits over the rail in both directions Strips of 1/2″ plywood are cut on the table saw Plywood squares are cut The template is used to trace the outline onto each square Holes are drilled to help […]

Joining Square Tubing at 90 Degrees, Preparation for Welding, the 3 ways I Fabricate the corner.

today I’m going to show you the three welding joints that I use for joining square tubing at a 90 degree angle and number one obviously is just a straight butt joint nothing too smart in that just join it straight up now you do get stuck with an open end whether it’s running up […]

The 3 ways I Fabricate 90 degree Corner joints for Welding Square Tubing

today I’m going to show you the three welding joints that I use for joining square tubing at a 90 degree angle and number one obviously is just a straight butt joint nothing too smart in that just join it straight up now you do get stuck with an open end whether it’s running up […]

Welding a SAILBOAT for the DESERT? – in California

When I was growing up, I really wanted a sailboat. But my parents were rock climbers and we spent a lot of family vacations out in the desert. So a couple of years ago, I decided to mix these two things from my childhood, and I built a land yacht. This is a sailboat with […]

Plastic Welding with Ease » Weld and repair a playground Slide using a plastic welder

Hi, I’m Bruce Lecky from Drader Manufacturing and I’m going to use the Drader Injectiweld to repair a damaged playground slide. My first job is to clean the damaged area. For maximum weld strength I’m going to use a grinder and a scraper to grind away the oxidization and the debris. The Injectiweld has a […]

How To Get Perfect Panel Gaps – Doors, Fenders, Hood – Car Resto Tricks – TC Penick and Eastwood

want to learn how to get perfect panel gaps on that restoration and keep watching this video to CLT see panic at bay 1 customers does it TC wow the crowd at SEMA 2013 in las vegas with his amazing 1958 cameo concept pickup truck that featured a ton of eastwood products most notably the […]

DIY CNC Router on Certiflat Welding Table Part 1: Introduction

All right, so what I’m gonna do with this is I’m going to be building the CNC table out of this and this is one of their 3×4, but what I’m going to do is I’m going to extend out here another foot and so I have four four foot by four foot capabilities and […]

How To TIG Weld Aluminum – Pointers and Troubleshooting with Eastwood

everybody it’s matt from eastwood company and welcome to another edition of eastwood tech videos they were talking about aluminum welding there’s a bunch of different ways that you can weld aluminum but today we’re going to cover probably the most popular two ways that’s TIG welding and mig welding we’re going to start off […]