Metal Fab Tech Tip: Pre-Stretch Metal Before Bead Rolling – Eastwood

and you guys that have done a lot of be growing i’m sure you’ve come across this problem like we’re showing right here have a nice flat paddle you lay all your beads out roll your beads perfectly straight you think everything is great you pull it out and well it’s just like this it’s […]

Making Motorcycle Gas Tanks – Part 2

These are selected scenes from the 166 minute long ‘Making Motorcycle Gas Tanks’ DVD. Check out all the Covell DVDs at covell.biz ! That’s kind of a rough sketch, but I think that’s more or less the shape I want to have for this tank. And we’ll put a soot coating on this piece of […]

Learn How to Use An English Wheel – Lots of Tech Tips From Eastwood

hi Mike Phillips hot rods and customs and Don Pennsylvania today we’re going to show you some tips and tricks on how to use the English wheel few ways you might not have thought of before right down to make it complicated shapes like this large reverse curve let’s get started there’s three different ways […]

Dent Repair How To DIY with MIG Stud Weld Kit from Eastwood

what we got here is our early Mustang you can see we put a quarter panel on it now we came up here to the door area grounded down to it looked ok once we got all the filler off because these two sharp creases we don’t have money for a new skin so we’re […]

How to Build a Custom Transmission & Driveshaft Tunnel – Ford Model A – Eastwood

the last step of this project we showed you how we made the floor pans for my model way back here the next step is going to be building the drive shaft and transmission tunnel for the car which a lot of people can find challenging to make now if we were back in the […]

Motorcycle Fender Fab! Building a Cafe Racer Fender from Scratch with Eastwood tools.

everybody it’s matt from eastwood we’re here in the eastwood garage doing another live-text session if you guys haven’t watched one of these before we want them to be as interactive as possible so what you guys to logon asked questions about the topic we have today share it with your friends and more people […]