Applying Iron-On Transfers to T-Shirts : How to Use Transfer Paper of T-Shirts

Hi, I’m Melina Peroso and welcome to Expert Village. So for this next step, we’re going to add transfer paper to this shirt. So what I’ve done is I’ve printed out a design. First I drew it, then I scanned it into my computer and then I colored it with Photo Shop. You don’t have […]

Fifth Wheel Installation – 2005 Ford F-350 – etrailer.com

Today on our 2005 Ford F-350 Super Duty Crew Cab with an eight-foot bed, were going to be installing the Reese Quick-Install Custom Base Rails and Installation Kit for Fifth Wheel Trailer Hitches, part number RP50082-58. First, were going to begin our installation by removing both of the rear wheels as it will give our […]

Metal Fab Tech Tip: Pre-Stretch Metal Before Bead Rolling – Eastwood

and you guys that have done a lot of be growing i’m sure you’ve come across this problem like we’re showing right here have a nice flat paddle you lay all your beads out roll your beads perfectly straight you think everything is great you pull it out and well it’s just like this it’s […]

Designing and Building a Sideboard – Woodworking Projects

I love this bench but I don’t love the way we use this bench it deserves better and we deserve better I’m sorry bench it’s not you it’s me so this bench sits right where you walk into our living room just past the entry. It has kind of turned into our dumping grounds. we […]

Cut-N-Weld Welding and Plasma Cutting Work Stand by Eastwood

it’s pretty sad that I have to start a video off like this but there are like three people out there that just try to really for everybody else this tool was given me by Eastwood and if you’re not capable of making your own decisions on whether you need these tools or not regardless […]

You Need This Tool – Episode 57 | TIG Welding Vise

it’s Friday fool and you need this tool welcome back to another glorious episode of it’s Friday fool you need this tool my name is Kyle Voss and every friday i bring you a tool a tool that i use here in this shop or that i have featured on this channel this week’s tool […]

You Need This Tool – Episode 59 | Muffler And Exhaust Pipe Expander

it’s Friday fool and you need this tool welcome back to another glorious episode of it’s Friday fool you need this tool my name is Kyle Voss and every friday i bring you a tool a tool that is used here in this shop or that i have featured on this channel do you guys […]

The New Metal Threatening Carbon Fiber Bike Frames | The GCN Tech Show Ep. 60

– Welcome to the GCN Tech Show. – This week we’ve got a new bike from Battaglin we’ve got a Bluetooth smart pump, we’ve got your bikes your upgrades and of course, the bike vault. – And we’ve also got a certain aluminum that you couldn’t weld, but now you can. – Yeah, that’s going […]

PART 2 73-87 C10 RUST REPAIR | Welding Chevy Patch Panels

Ok, here’s another video I’m posting about my Rust panel, patch panel work Rust repair work I’m doing On my 77 half ton C10 And I wanted to show you guys I made a mistake here And I wanted to document this So others don’t make this same mistake Basically what I did was I […]

Aircraft coffee table: Customer pick up

Come on in Oh my God it’s Perfect! So I got ah An actual logo No way! Ah, for the Dehaviland Beaver And I transfered it on some laminated birch Ah, just to fill in the center a little bit too But I wanted the bottom to..I struggled with the idea for the base Because […]