DIY utility trailer – sides and ramps for cargo

okay hello and welcome to another episode of BigRredFishDad YouTube channel. Today we were going to get some bass road base for some of the holes down there that wash out in the rain on the hill and we decided you know that the dirt gets caught in the in between these angling arms here […]

Run Off River (ROR) Pump | Mechanical Engineering (Hydropower) Project | Kathmandu University

We are elaborating about our project “ROR Pump” These blades of the turbine are places with inlet angle 30 degree… …and outlet angle 90 degree. The water strikes here… …and goes to this direction, thus makes the turbine to rotate in this direction. Here we have used two bearing casing. The shaft is of 25 […]

DIY CNC Router on Certiflat Welding Table Part 9: Update Running Linux

hey YouTube so it’s been about a year and a half since I did it in videos on the third flat CNC machine and frankly I haven’t done anything with it since then it’s been kind of a workbench and catch-all for storm throwing stuff on top of table I ran into a project the […]

Quickie #007 Cheap Welding Table – 22€

Now let’s put the pieces together oh… we’re gonna insert a piece of plywood from the top to give it some strength the plywood is a left-over piece from the DIY market and we’re gonna cut it to the right size now now thät comes on… yes, yes… we need to make some minor adjustments […]