Butt Welding Sheet Metal With A Mig Welder

Hey guys. I wanted to take just a minute. A few minutes here and talk about mig welding technique when you are doing difficult welds. I think the most difficult weld to do is a butt weld on a piece of sheet metal. And I’ve made a few videos welding patches into cars and things […]

Plug Welding Holes in Sheet Metal with Magnetic Copper Backers – Mike Finnegan at Hot Rod – Eastwood

hey it’s Finnegan back in the hot rod garage and i’m getting ready to weld a whole lot of holes shut in the firewall my 1955 Chevy using the eastwood magnetic plug welding tool this thing is awesome think of it as another pair of hands that are going to hold that copper plate right […]

Welding Patch Panels – Lap or Butt?

when it comes to rust repair and welding patch panels one question always arises and that is should I be butt welding should I cut a patch that fits that hole perfectly and butt weld that or should I cut a patch that comes close and lap weld it so the idea behind butt welding […]

Welding – Tips for Beginners, Types of Welds and Troubleshooting from Eastwood

everybody it’s matt from Eastwood thanks for joining in on our live beginners welding demo I’m going to show you some tips and tricks to make you a better welder and also some things to look out look out for along the way if you’re doing any bad welds or anything like that so the […]

Ep9 Welded Door Patch Panels

So what I have here is my passenger side door, which I’ve had to cut a large portion of the bottom out. Which, as you can see here on the outer panel, it was very rusty. Along this out panel edge, I allowed the edge to have a flange. That way once I bring my […]