Concrete Joints

G’day welcome back to Buildsum this time I want to show you three joints that we commonly use when we pour concrete Just to explain what I’ve got drawn here. I’ve got two brick Walls Which represent the outside of a single building or two buildings doesn’t really matter but a sand bed down to […]

Cross Cut Sled w/ Finger Joint Jig Insert

Man these old jigs take up a lot of space! Grrr, warped and unusable! Let’s make a new one. Some scrap plywood (from failed attempts at kerf bending) Cleaning up the edges. Some scrap 2×4’s Jointing the faces smooth. Squaring up the ends Routing a chamfer. This will let dust collect there and not affect […]

Metal Melting Furnace Build

In this video Im going to show you how I made this metal melting furnace It’s basically a trash can or still pail lined with Kao Wool. I Got the plans from Grant thompson. I’ll leave a link in the description for his channel It’s a smaller metal melting furnace But I have melted aluminum […]

MCAS Iwakuni, Iwakuni city leadership conduct Joint Leadership Walk

Marine Corps Air Station Iwakuni and Iwakuni City officials met with local business owners and community members during the 11th Joint Leadership Walk. The goal of the walk is to reinforce friendly bonds between the Iwakuni community and members of the air station. This is Colonel Richard Fuerst’s last Joint Leadership Walk as the commanding […]

Acetone Destroys Your Lego

[Music] Guys, today, we are here at a store called Bricks & Minifigs with our friend Cory. This is a Lego store. It’s… Describe it to us a little bit. At Bricks & Minifigs, we sell all things Lego. We buy back Lego, and we resell pre-owned sets, loose minifigures, bulk pieces, you can build […]

Metal Shaping On The Mustang Hot Rod

alright guys welcome back to the fab forums yet another episode on the Bibbster so in the last couple of videos I’ve been working on getting the framing of that rear rear section of the Bibbster kind of the idea done but today it’s time to lay some sheet metal on it so gonna take […]

How to cut steampipe/black pipe for a turbo merge collector with simple tools

2.5mm (3/32″) thick cutting disc: Cuts straight Cuts slow 1.0mm (3/64″) thick cutting disc tends to drift when cutting off square cuts fast Determining offset to cut pipes to fit rectangular turbine entry (T3 flange shown here)

Spacelords – Heavy Metal Update!

[MUSIC] [XBOX SOUND]

Vintage Formula Style Go Kart Build (Part1) Tubular Frame

Starting point Plans and drawings Bottom frame Welding tubes together to get matching pair 5cm up from rear Front angles up also Then it also narrows from midle to front Making some kind of fixture table Parallel lines 5cm riser blocks Temporary support Making it square and welding to table Bending top of the frame […]

Tacoma C4Fab Low-Profile Metal Off-Road Winch Bumper Installation

So, I got this 2018 Toyota Tacoma a few months ago and I’ve been doing projects on it ever since. And I’ve added a lift to it – a three-inch Icon suspension, and I’ve added this roof rack. And I’ve added a grille to the front of the truck. Today we’re going to do something […]