Con-FUSE-ing Problem on Triumph Tiger 800 XC.

Well that’s weird, my bike has just died. Hmmm. Well my horn still works. Now how do you get these things out? Oh F*&% Ohhhh, dropped it down in there, somewhere. It’s never going to start now. Ha ha. Let’s see if this works. No. After all that it wasn’t it. Don’t lose it, don’t […]

How To Test Air Conditioner Time Delay Fuses

OK. These are fuses that I recovered that we’re blown in the system and what I wanted to show you is that a lot of times it only blows one of the fuses. So I wanted to show you how you can test these. Setting your volt meter to ohms verify that your volt meter […]

Ins and Outs of Automotive Fuses | Hagerty DIY

– Hi, I’m Matt Lewis with Hagerty, and in today’s DIY, we’re gonna be talking about automotive fuses: where they are, how to test them, and what to expect. In every car, you’re gonna find fuses, and these fuses are designed to protect the electrical circuit that they’re connected to. The way in which they […]

Field’s Metal vs Aluminium

[“Cartoon Space Utopia” intro music] All right everyone welcome back to Cody’sLab. So, I have here a chunk of aluminum. See, angle ‘luminum It’s about three nano light seconds long But of course, I’m only gonna be using a small piece of it because today I want to actually destroy it using a liquid metal. […]

Liquid Nitrogen Vs Metals (cold gun part 1)

Hi everyone, welcome back to Cody’s lab So today I have some samples of metal And we’re gonna test to see how these act under low temperatures To see what it’s going to take for me to Build a gun that shoots bullets that are frozen down to liquid nitrogen temperatures Now in the movies […]

The Metal Melter

I’ve just modified this Microwave Oven Transformer into a dangerous little device. 800 amps of electrical current is about to be bad news for anything made of metal. Today I’m in the mood to melt some metal. This Microwave Oven Transformer used to be a dangerously high-voltage device, but I modified it so the voltage […]

Can You Melt Obsidian and Cast a Sword?

Over the past few months I’ve been working on this video as a follow-up to user comments on a previous video on if it’s possible to cast obsidian. This proved to be a major challenge that took six attempts, broke multiple crucibles and two different kilns. But I didn’t want to stop until I finally […]

UNBREAKABLE BOX vs THE HACKSMITH ($10,000 TO BE WON)

No regrets so bouncing Heads up! that’s the money shot What up guys I know you don’t know me I’m JustDustin and I got this unbreakable box here we could explain it but it’s pretty simple there’s an unbreakable box there’s 10 grand inside I’ve been searching across YouTube to try to see if there’s […]

How to Make The Metal Melter

In a previous video I used a modified Microwave Oven Transformer as an electrical metal melter. In this video you’ll learn step by step how it was made, and what I’m using it for now. In a previous project, I found an old microwave in a dumpster and hacked it open to see what components […]

Make a Spot Welder for Cheap!!

A typical resistance spot welder like this can range in price from around $200 to over $800! That’s a little out of my price range, so for this project let’s make this one from common materials, and for just a few bucks! This modified transformer is the heart of the Spot Welder, and you might […]