COMO SOLDAR FERRO FUNDIDO – DIY

Turbo noises Hi guys, welcome to Baguete’s Garage Today we will repair a cast iron exhaust manifold that cracked Let´s start by removing the manifold from the engine Now we will remove the catalytic converter and the oxygen sensor The catalytic converter is in good shape and the gasket too Let’s clean the area where […]

How To Make Curved Flanges On Sheet Metal Panels | Tipping Die

what is up fabrication nation welcome back for the third day in a row for thinner of how many everybody days anyway got some total education for you today no major fabrication if you were along for the ride yesterday work on the battery box yesterday we built this battery box for the goose of […]

Welding A Custom Fuel Filler And Battery Tray | Turbo Mustang

I think today is going to be a hang out with me day you okay with that nothing in particular going to be working on except for the goose going to try to get some stuff down this thing going to try to finish the filler next to the fuel tank may work on some […]

What happens when you weld on the wrong polarity – 7018 DCEN

Hi, I’m Baguete and today we will make a welding experiment. Let’s see what happens when you use the wrong polarity. This electrode is used on the positive side and the negative side is on the workpiece. Lets try the other way around and see what happens. Unstable electrical arc with lots of splatter. Hard […]

Welding Aluminum Exhaust On The Twin Turbo Mustang

all right so let me take a second to explain to you exactly what I’m about to do so there’s already a stainless pipe that comes off the turbo and goes basically down into the inner fender got v-band clamps on both ends originally the aluminum was kind of went from there and tried to […]