120V 240V Electricity explained – Split phase 3 wire

– Hey there guys. Paul here from theengineeringmindset.com. In this video we’re going to be learning how three wire split phase electricity supplies work to get 120 and 240 volts. We’ll look at how the electricity gets from the power station over to the property and then how it’s connected around the property and each […]

MXR Fullbore Metal

Three Phase Electricity Basics and Calculations electrical engineering

Hey there, guys. Paul here from TheEngineeringMindset.com. In this video, we’re going to be learning more about three phase electricity. We’ll cover how three phases are generated, how we get two voltages from a three phase system, what do cycle and hertz mean, where the sine wave comes from, and how to calculate the voltages. […]

ENGL Ironball 20 Amp – Modern Metal Demo! | Axe Palace

What’s up guys, it’s Sam from The Axe Palace again, and today Chris and I are checking out the Engl Ironball head. Alright, let’s get into it!

🔌 Basic Electricity – What is voltage?

In my first video about basic electricity, you learned that current is basically the flow of electrons in a wire. And the term Amps or amperes refers to how many electrons are flowing past a certain point per second. In this video I’m going to first tell you what voltage does, then I’m going to […]

The Metal Melter

I’ve just modified this Microwave Oven Transformer into a dangerous little device. 800 amps of electrical current is about to be bad news for anything made of metal. Today I’m in the mood to melt some metal. This Microwave Oven Transformer used to be a dangerously high-voltage device, but I modified it so the voltage […]

What is an amp? – Electricity Explained – (2)

This video follows up on my first video on electricity, which you can see by clicking on the card or the link in the description. So, what is an amp? A quick recap: Metals, like copper, have electrons that flow freely throughout the material, from atom to atom, even at room temperatures. And, as explained […]

Basic Electricity – Resistance and Ohm’s law

In this video I’m going to talk about electrical resistance, ohm’s law, and how to pick a resistor to limit current in an LED circuit. In previous videos I talked about how voltage can behave like a pushing force, pushing electric current around a circuit. But in one example I connected an LED straight to […]

Basic Electricity – Power and watts

Today I’m going to talk about watts and electrical power. In my previous video about voltage, I talked about how amperes is the number of coulombs flowing per second, and volts is the number of joules of energy transferred for each coulomb of charge that flows. I had an example set up where I had […]