How to Attach a Ladder to a Tank Without Welding

In this video, we will show you how to bond a structure such as a ladder or cell-phone antenna to the side of a tank Surface preparation was done using a grit blaster We made sure blasting was done correctly by checking the profile with the replica tape Next, we clean all of the blasted […]

Self-Etching Primers – Types & Applications – Weld Thru & High Build from Eastwood

Self Etching Primer JR R&D Corner Hi, this is JR, Product Manager for the Eastwood Company. We had just some confusion out there on when and when not to use self etching primers. Well, today we are going to give you the idea you need to make the right decision and right application, so let’s […]

How to Stop and Repair a Tank Live Leak

In this video, we will be demonstrating how to repair a live leak on a tank We use Belzona 9611 to stop the leak and Belzona 1161 to bond the plate to the tank Surface preparation was done using a file Next, the surface was cleaned to remove any dirt, grease and other contaminants After […]

Belzona 1212 – Rapid Curing Technology for Leak Sealing

Belzona 1212 is the latest in rapid cure and adhesive technology for your leak repair and sealing needs It is easy to use with a one-to-one volume mix ratio And it can be applied with regular tools and minimal training Once prepared, Belzona 1212 is incredibly surface tolerant giving it the ability to bond with […]

How to Repair a Shaft Using Forming Techniques

In this video, we’ll be demonstrating how to rebuild a damaged shaft using forming techniques For this repair we used Belzona 1111 in a metal former manufactured with an outside diameter slightly larger than the diameter of the shaft First, we cleaned the damaged area of the shaft We undercut the repair area and roughened […]

How to Bond Metal Brackets to a Metal Tank Without Welding

In this video, we’ll be demonstrating the pros of cold bonding versus welding We attached two brackets to a tank One was attached to the tank via welding and the other via cold bonding Before we began, we marked out the perimeter of the brackets For the welded bracket we prepared the surface area outside […]

How to Repair a Weld Seam Without Welding

In this video, we will be demonstrating how to repair a weld seam with plate bonding by injection For this repair, we use Belzona 1161 to bond the plate and Belzona 5831 to repair the weld seam by injection First we prepare the surface using a power tool Then we clean the repair area to […]