AC TIG, MIG and Stick Weld With One Powerful Machine

This is a Multimatic 220 AC/DC. This machine is capable of MIG, Stick, and AC/DC TIG. A lot of our customers use the Multimatic 215 and the Multimatic 200 for steel and stainless. This machine gives them the added benefit of AC TIG for aluminum. This all-in-one solution allows you to weld with 230 amps […]

Adjust AC Frequency and Balance for Aluminum TIG Welding

The Multimatic 220 is super easy to set up and use. It’s got Auto-Set technology that allows you to set it up automatically with your tungsten size and also, all you do is just choose your material thickness and the machine will set the parameters for you. They give you a range to use, but […]

Should You Use Pulsed TIG Welding for Aluminum?

Are you ever challenged with making long runs on your aluminum production pieces? Or maybe you just want a little bit faster weld with welding aluminum. You can try adding the pulser to it to help you add the filler metal to your weld puddle. And if you increase the pulses per second on your […]

Welding Aluminum With the Dynasty 280 DX Multiprocess Welder

To set up the Dynasty 280 DX Multiprocess to weld aluminum using an ArcReach 12 SuitCase feeder, there are a few considerations to get optimal performance with this solution. Use 3/64 inch Hobart MaxalMig 4943 or 5356 wire and a 300 amp Bernard gun. Install the appropriate U-groove drive rolls and contact tip. For better […]

Dynasty 280 DX Multiprocess Setup: Flux-Cored Arc Welding

This is how to set up the Dynasty 280 DX Multiprocess for welding steel using an ArcReach 12 SuitCase feeder, 1/16 inch Hobart XLR-8 wire, and a Bernard Dura-Flux gun. First, install the appropriate drive rolls and contact tip. With all connections complete, select the V-Sense mode on the front of the Dynasty. When using […]