6G 7018 Pipe: Quick Tips for the Cap Pass

(tool welding) (tool sparking) – We’re doing 7018, 3/32nd 7018 on small two inch, schedule 80. (tool sparking) In this one here, we’re gonna do six GM and this gonna go straight to the 2B cap. This has a chig root in it. I wish it was just a little bit fuller, but I think […]

TIG WELDING PIPE 400A(16INCH) Stainless pipe #walking the cup

안녕하세요 오늘은 스테인레스 파이프 400a 티그용접에 대한 영상을 만들었습니다 단차가 약간 있구요 이런 모양으로 TACKING 되어 있습니다 구멍도 뚫려있는 상황이구요 이런 모양의 물건 입니다 그리고 파이프는 400A 치수는 이 정도 되구요 사이즈는 16인치 스케줄 10자리 스테인레스 파이프입니다 파이프 두께는 4.78mm 약 5mm가 약간 안되죠 링 두께는5mm 스테인레스 스틸입니다 이런 모양의 물건을 해보겠습니다 이런 제품의 용접방법에도 […]

#TIG Welding method inside flange #1 (FREE HAND)플랜지 안쪽 용접방법 #1 #tigwelding

Oh, hi. Today we’ve created a video of the inner weld of the flange. The pipe size is 100a and the schedule is 10. It’s about 3mm to 4mm thick. And it’s punching. It’s upside down. Like this…KS KOREA 10k 100A Flange. Slip-on type. There are many types of flanges. Slip-on type butt type There […]

TIG WELDING METHOD OUTSIDE FLANGE #1 walking the cup (weaving) 플랜지 바깥쪽 티그용접 방법 #1 위빙

So, hello. Nice to meet you. This time. on flange outside welding I made a video about it. This is how it looks. pipe size 100A SCH10 304 stainless steel pipe. It’s a TACK look like this. It’s punching. I can’t see well. KS KOREA 10K 100A flanges. It looks like this. It’s on the […]

welding positions 1G, 2G, 3G, 4G

Hello friends Today, I am going to share with you how to conduct the welder performance test. See, before moving ahead, I would like to tell you about the different welding positions We have four different welding positions like 1G, 2G, 3G and 4G for plate welding. Similarly, we have four different welding positions for […]