What is FLAME Festival?

Flame Festival is about gathering together for a weekend of fun in the beautiful Cherokee farms to grow and learn and share what we know so that we can all find that deeper level of who we are together. We’ve got classes during the day. We have instructors from all over the world coming in […]

FS | 17 | Mods CLAAS AVERO 160 Combine Harvester

HI GUYS !!!! Welcome to Farming Simulator 17 Mods Channel in this video I will show You a small combine you can use at tight fields. The CLAAS AVERO 160 CLAAS AVERO 5.600l Capacity 185Hp 40Km/h Top Speed CLAAS C 430 Drapper Header 4.2m Working Width 12Km/h Working Speed If you enjoy watching my videos… […]

FS | 17 | Mods John Deere T Series Combine Harvester

HI GUYS !!!! Welcome to Farming Simulator 17 Mods Channel in this video I will show You a New Harvester Form john Deere. John Deere T Series Combine Harvester 3 Engine Setup 4 Wheel Setup 11.000l Capacity 630R Drapper Header 9.1m Working Width 11Km/h Working Speed Unfold Drapper Header Spikes R KEY ZURNS Raps Profi […]

Jeep Wrangler Synergy Dana 30/44 HD Ball Joint Set (2007-2017 JK) Review

I’m Ryan from extremeterrain.com and this is my review of the Synergy Ball Joint Set for all of you with either the Dana 30 or the Dana 44 axle in your 2007 and up JK. Today we are going to talk through the installation of this ball joint set, which I am going to give […]

Maya for Flame Artists – Part 1 – Introduction – 2017×1

Hey everyone, Grant Kay for the Flame Learning Channel.  Over the next few videos, we are going to look at Maya from a Flame Artist’s point of view… As well as prepare a 3D model for importing into Flame.   By having a consolidated and optimized 3D model…  Will improve performance… As well as make […]

Restoring a Smoke 2017 Archive in Flame 2017

Hi everyone, Grant Kay for the Smoke Learning Channel. In this video, I’ll go through the workflow of opening and restoring a Smoke archive in Flame 2017.  This is a one-way workflow that allows you to promote any Smoke projects into the Flame 2017 products for further finishing.  We’ll start off by creating an archive […]

Evie Clair: This Finale Tribute To Her Dad Will MELT AMERICA’S HEART!! America’s Got Talent 2017

My dad taught me after I started something to always finish it That’s Why I’m fighting till the end. Just like he did I see trees of green Red roses too I see them bloom for me and you And I think to myself What a wonderful world I see skies of blue. I see […]

CM – Part 6 – ACES 1.0 Colour Management – Flame 2017×1

Hey everyone, Grant Kay for the Flame Learning Channel. In part 5 of Active Colour Management in Flame 2017 Extension 1Ö We looked at the Simple Linear Colour Management Workflow. This involved setting up a project to work in Scene-Linear REC709 Ö And converting all the material into that colour space for compositing. All based […]

How to install a Dash Cam to Nissan Micra K14 Fuse Box (English Subtitle)

Hello Today I want to show you how I connected the dashcam directly to the fuses. I arranged the cable behind the rearview mirror and I inserted it here, then I dragged it until here. You will be able to see a little bit the cable. I could have pushed it inside better, but I […]