TIG WELDING PIPE 400A(16INCH) Stainless pipe #walking the cup

안녕하세요 오늘은 스테인레스 파이프 400a 티그용접에 대한 영상을 만들었습니다 단차가 약간 있구요 이런 모양으로 TACKING 되어 있습니다 구멍도 뚫려있는 상황이구요 이런 모양의 물건 입니다 그리고 파이프는 400A 치수는 이 정도 되구요 사이즈는 16인치 스케줄 10자리 스테인레스 파이프입니다 파이프 두께는 4.78mm 약 5mm가 약간 안되죠 링 두께는5mm 스테인레스 스틸입니다 이런 모양의 물건을 해보겠습니다 이런 제품의 용접방법에도 […]

TIG welding stainless pipe- 5G Fill Pass and Cap Pass (Walking The Cup)

5G Filling and Final Welding Hello. We’re gonna do pipe welding again today. We’ve filmed the fillings and final welds in 5G position. I’d appreciate it if you could press “subscribe” and “Like.” This is a pipe that was back-bead welded at the previous time. If you have any questions about back-bead welding, we would […]

Tig welding stainless pipe. 5G root pass. 65A (2 1/2 inch) SCH10

5G Back-Bead Welding Hello. Today, we made a video about the stainless steel pipe “5G Root Pass.” I’d appreciate it if you could press “subscribe” and “Like.” So today we’re going to do a 5G position weld. Welding will be done from 6 o’clock to 12 o’ Pipe size is 65A (2 1/2 inch) SCH10 […]

Tig Welding Stainless Pipe – Keyhole Welding and Tight Bead

Keyhole welding and tight bead Hello. Today, we made a video about keyhole welding and a dense bead. I’d appreciate it if you could press “subscribe” and “Like.” This is a 100A (4 inch) SCH10 Stainless 304 pipe. Pipe thickness is 3.05mm. I’m going to do this welding today. Today we did “Tack-weld” using stainless […]

용접 테이블 만들기 [welding table Build]

We’re creating a welding table. This iron plate… It’s about 20 T’s of steel. And based on this center, The iron plate’s a little bent. Assuming you’re working, This is how short a difference happens. If there’s such a short difference, You might say that you can hardly work. I mean, there’s a difference. There’s […]

#TIG Welding method inside flange #1 (FREE HAND)플랜지 안쪽 용접방법 #1 #tigwelding

Oh, hi. Today we’ve created a video of the inner weld of the flange. The pipe size is 100a and the schedule is 10. It’s about 3mm to 4mm thick. And it’s punching. It’s upside down. Like this…KS KOREA 10k 100A Flange. Slip-on type. There are many types of flanges. Slip-on type butt type There […]

아크용접 으로 테이블만들기 2 [실전 생활용접 #3]

1.4t. Each pipe is still. We did a tech-weld, and the current value is… It’s going to be somewhere between 90 and 100. Then put the two cubes that were made. Release the transverse pipe. It’s the same way you make it at first. And here’s one more explanation. Any welding is almost the same, […]

아크용접 으로 테이블만들기 1 [실전 생활용접 #3]

Hello, I’m an iron workshop. Today will be the third time for real life. As you saw in the video just now, Let’s make a table today. So far, we’ve been working on welding. I’ve given you some tips on how to practice. Now we’re going to move on to the actual work. And this […]

Tig welding Walking The Cup 5G pipe welding Hot Pass Fill Pass Cap Pass carbon steel pipe

Hello. Today, I will do pipe welding with 5G position. Fill in the gaps in the grooves and cover the final welds. I’d appreciate it if you could press “subscribe” and “like.” Now this is a back-bead welded pipe from the previous time. If you’re curious about the back-bead video, please refer to the previous […]

Tig welding stainless steel pipe -2Pass weld and low back-bead (65A SCH10)

2Pass welds and low back-beads Hello. Today we’ll be welding stainless steel pipes again. As I mentioned in the previous video, I’ve captured the 2Pass welds and the low back-beads. I’d appreciate it if you could press “Subscribe” and “Like.” This is a 65A (2 1/2 inch) SCH10 stainless steel pipe. In the previous time, […]