K-TIG Live Demonstration Session

K-TIG Live Demonstration Session


Greetings! Welcome to your K-TIG information session We can’t wait to find out more about what you guys do as well as share some information about what K-TIG does After that we’ll shoot out into the workshop we’ll give you a live demonstration and you can what a weld in real time via out live feed. You can see here in the background this is the linear guide which allows the torch to move up and down as you can see it’s just a square butt joint come up to the controller and press the start button and that will begin the whole process the gas, it will start the rotation strike the arc and we now have a keyhole weld that’s fully penetrating through that joint so to have a quick look at what’s going on inside that carriage we’ll come up to the camera on screen here So we’re just about done There is the start of the weld it’s going to head back in under the arc so that’s ramping down then the arc will extinguish There we go.

One thought on “K-TIG Live Demonstration Session

Leave a Reply

Your email address will not be published. Required fields are marked *