아크용접 초보를 위한 동영상.

아크용접 초보를 위한 동영상.


hi~ For those of you who are new to welding, I’ll give you one of the most basic tips. Get weld training, or… You will learn welding through an acquaintance who knows how to weld. This is what I hear the most. I want the welding rod on this base to be properly spaced. If you proceed, you will do well. We’ll talk about this many times. That’s right. There’s a good arc clearance. So we’re going to have to make sure that this arc is spaced well. If we keep going, we’ll be able to weld. There’s nothing wrong with it. But for beginners, that’s a problem. But just because you keep practicing doesn’t mean you’re doing It’ll feel faster if you practice because you know what you can’t do. I’ll tell you what novice makes the most mistakes. Welding is not the only thing that’s called arc welding. I can’t experience anything like this in my daily life. I mean, as soon as we start the volume, Welding rods get shorter. The welding rod melts and shrinks length. So you’re gonna tell him to keep his distance, I’m trying to keep the gap right. The welding rod’s shortened, so it’s not spaced out. There’s some things I can’t guess. It’s bigger if the welding rod gets shorter and doesn’t fit. So to get it right, it’s as much as the welding rod gets shorter. We need to supply them to make sure they’s. It’s the first time I’ve done it, so I don’t have that feeling. It seems to me that rather than trying to keep things spaced, As much as it’s shrinking. I think it’s better to say that we’re supplying. So now I’m going to try to keep it spaced. We’re gonna need to know if the rods are shrinking. I’ll recognize it and put it in. It’ If this happens, the welding rod will stick. Then take it off, do it again, put it in, stick it together. Because that doesn’t work. I’d like to get a feel for this, but is this a little weak? Then we start adjusting the current. I think it’s weak, so let’s get a little more current and try again. That doesn’t stick, but it reduces the weld rods faster. I don’t think that’s acceptable for beginners. Then, uh, it’s too salty, and then lower it again. He lifted, lifted, and lowered. Eventually, we can go down a lot more than before. And then you can’t start scratching and sticking. It’s hard to weld. without a start So now we’re going to take this current. by the standards If possible, don’t move and fix it. It’s hard to hold onto your hand. Well, that’s one way We need to get a feel for the shrinking weld rods. There’s one more thing that’s There’s one other thing that gets worse. What this means is that most of the first people are confused. I think we’re going to start welding from here to here. I’m going to start welding here. You’re under the illusion. You have to throw this away. We’re going to have to weld it from here to here. It’s not like this. If you look at it in real life We’re going to start welding here. That’s how it ends. We’ll start here to start That’s how it ends. The welding rod’s shrinking. But since I’ve never been in contact with welding, Welding is going from here to here. You’re gonna have to weld it like this. I’m holding him because he’s mistaken. It’s a combination of these two, so it’s hard to weld. The first thing we need to do is to fix it. It’s hard to believe that the welding rods are shrinking faster than we thought. You have to be aware. And then the welding is in progress. Well, it’s true that progress is going in the direction of progress. As it stands now, I’m gonna have to do a lot of work to get me to weld. You don’t have to pull like this from here. It’s not about pulling. It’s the right thing to do with your hands in there. You’re just thinking about these two things. You’ll be much better if you practice. That’s it.

76 thoughts on “아크용접 초보를 위한 동영상.

  1. 그간 간단히 용접할일있어서 용접기사서 했는데 잘안되었는데. 초보자가 이해하기좋게 중요한 포인트을 잡아 설명해주니 이해가 잘 되었습니다 감사‥^^

  2. 오늘 용접 처음 접해봤는데 자꾸 용접봉이 붙고 그러던데.. 아무튼 좋은영상 감사해요

  3. 이거 알차네요. 처음에 하는 시행착오에 대해 전부 설명해주셨네요. 그것도 초심자의 입장에서

  4. 비파괴검사업을 하고있는데 용접부위검사하는 일이 많습니다. 근데 용접 전문가가 아니다보니 검사판독에 미흡함이 있어서 제대로 알고자 구독했습니다. 감사합니다 ㅎ

  5. 좋은 강의네요. 조횟수가 9만이 넘는데 좋아요가 너무 없는데 보시는 분들은 만드신 분의 노고를 생각해주셨으면 합니다.

  6. 목소리 넘 좋으시다. 지진희 목소리와 비슷한 풍인데 더 섬세하면서 발음 정확하네요. 부러워요.

  7. 용접 배우면서 기숙생입니다…
    용접을 배우고있지만 모재바닥에다가 아크 열이 발생하고 비드쌓다보면 자꾸 용접봉이 모재에 붙네요…ㅠㅠ
    잘하는방법좀…

  8. 제가 않되는 이유가 바로 이것이었네요….이번 주말엔 이유를 알았으니 다시 잡아 연습해야 겠네요.. 감사합니다.

  9. 편리하게 사용할 수 있는 제품소개
    Introduce – https://youtu.be/FB4Kjk1gbPY
    Relibility – https://youtu.be/OipEnRG_wSc

  10. 저만의 노하우는 용접봉을 바늘이라고 (계속)생각하며 작업하면 초보도 잘할수 있다는거…(계속이 중요함)

  11. 아크용접 좋아 다들 기술자?
    용접 모제 적당한간격 ~~
    각도 간격 손기술 감
    용접기 성능 전류 조절 ㅋ
    현장에서 전력이 일정하게 나올 확률이 얼마나 될가요

  12. 말투가 무척 초보자들을 답답해 하고 설명이 간결하지 않고 길어서 여기까지만 보고 갑니다 3분42초

  13. 유타브용접설명잘보고있구요초보자는많은도우을받고있구요
    한가지문의해봅니다저음시작할까해서마스타용접기를하나구매하면서용접면을같이구매했는데요자동이아니고수동이라서헬멧을쓰면깜깜해서아무것도보이지안아그래서자동용접면을살까하는데자동면을쓰면용접을할수있을까요알려주시면고맙게습니다 안녕히

  14. 바쁜데죄송합니다다름이아니고자동용접연을살까생각하고있는데마을에서용접하는사람이헬멧을사지말고용접보안경이더좋다고권하는데처음시작해볼까하는사람에게는굉장히해갈리네요사장님의조언이필요할것같에서염치불고하고여쭤봅니다현명한답변을부탁드림니다미안힙니다 안녕히

  15. 댓글에 악플보니까 나이 들으면 옹졸해진다는 말이 괜히있는게 아니네요
    . 초보입장으로서 좋은 영상이었습니다

  16. 수도용 스텐파이프 15파이를 3.2t철판에 구멍을 뚫어서 집어넣고 스텐 용접봉으로 아크 용접해서 물이 새지 않도록하고 싶은데 빵꾸가나서 물넣고 테스트하면 물이 줄줄 새는데 어떻게 하면 해결할 수 있을까요? 전류를 100A 놓고 하고 있습니다. 줄여야하나요?

  17. 아크용접기 관련 초보 유튜버 용팔이 TV입니다
    아크용접 영상 준비하면서 철공방님 영상 정말 많이 봤습니다.

    이 아크용접 초보를 위한 동영상은 한 5~60번은 돌려본듯 싶습니다. ㅎㅎ

    계속 구독하겠습니다~ 건승하세요

  18. 완전  제 얘기였습니다.  정말 감사합니다.  한번 영상을 보고나서 오늘 용접해보니 완전 좋아졌습니다.  감사합니다.

  19. 6t 전기아크 용접 맞대기할때 1차비드에서 아크가 잘끊기는데 아크안정을 못시키는건가요? 위보기할때 어떤것을 주의하면서 하는게좋을까요?

Leave a Reply

Your email address will not be published. Required fields are marked *